lights
Showing all 7 results
-
Hot Rod Interior Lights
Switched Dome Light (L82)
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
SKU: L82 -
Hot Rod Exterior Lighting
Billet Frames L58 Series LED Lights (L58-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58 kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The large L58 Frame is 16-3/4″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58-FR -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR -
-
Hot Rod Exterior Lighting, Hot Rod LED Marker Lights
4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
Hot Rod Exterior Lighting, Hot Rod LED Marker Lights4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
The amber light has 12 super bright amber LED’s. The red light has 15 super bright red LED’s Both lights have clear lenses (4-1/4” long, 1/2” wide, 1/4” deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
SKU: L89 -
Hot Rod Exterior Lighting
4-1/4″ White Running Light with Amber Turn Signal (Pairs) L89WA
Each light contains (2) clusters of Bright White LED’s – 3 LED’s each – for running lights AND (8) Super Bright Amber LED’s for Turn Signals. Flush Mount Clear Lenses are 1/2″ wide x 4-1/4″ long x 1/4″ thick with diffuser. Mounting hardware included.
SKU: L89WA -
Hot Rod Exterior Lighting
Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached. The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
SKU: 23***
