remote
Showing all 6 results
-
Remotes & Keyless Entry Systems
Gemini 2-Function Remote Control (L-GM2Z)
The Gemini remote control gives you two functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
SKU: L-GM2Z -
Remotes & Keyless Entry Systems
Quadra 4 Function Remote Control with 3 Transmitters (L-QD4)
Ourย Quadra remote control has four functions – perfect for 2 power windows up-and-down. Or use it to open two doors or other operations plus 2 more functions for trunk release, battery disconnect, etc. Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes (2) built-in 30 amp relays for Channels #1 and #2 plus (2), 40 amp external relays for Channels #3 and #4. 12 ga. power wire leads. Built-in fuse holder with fuses. Pre-wired for Channel #1 and #2 backup switches (switches not included). Wow! It has (3), 4 button transmitters – a button for each function! Optional ignition disable. Connectors, great instructions… and it’s from StreetWorks so you know it’s good.
SKU: L-QD4 -
Automotive Battery Disconnect Switches & Kits
Battery Disconnect For Remote Controls (L27R)
Use that extra remote control channel (just one momentary switch) to shut off the battery from outside the car. Push it once and the battery is connected. Push it again and the battery feed is disconnected. Includes our auxiliary “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is no electricity used when this unit is ON or OFF, only while switching. Remote not included.
SKU: L27R -
Remotes & Keyless Entry Systems
Hot Dot Remote Ignition Link
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.
SKU: L88 -
Custom Hot Rod Window Cranks, Releases
Neat Lever Latch Release Kit (B19)
How about a Lever latch Release? We’ve got that, too! This 2-door kit has the billet levers (1-5/8″ L x 3/4″ W x 5/8″ H), cable, connectors, bell-crank, studs and hardware for mounting and attachment to your gator-jaw style latch.
SKU: B19 -
Releases
Installation Kit for Neat Nobs
Allows you to install StreetWorks Neat Nobs away from the latch and door jam, forward on the door where the original inside handle was. A “T” lever and cable are used to attach to the latch. Once installed, a simple push on the nob actuates the latch. Our kit works in either steel or fiberglass cars and has all of the hardware you need to connect a Neat Nob kit to gator-jaw style latches. Detailed drawing and written instructions included.
SKU: B14R
