turn
Showing all 12 results
-
Custom Switches for Hot Rods
Turn Signal Toggle Switch
Metal Toggle Switch, 7/8โ long for right or left turn indication, center off. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10-T -
Custom Switches for Hot Rods
Self Canceling Turn Signal Toggle Switch (L10-TSC)
Metal Toggle Switch, 7/8โ long for right or left turn indication, center off. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. (bottom right in photo)
SKU: L10-TSC -
Hot Rod Exterior Lighting
Double-D LED Taillights (L58-DDR)
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
SKU: L58-DDR -
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
Double-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior LightingDouble-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Double-D taillights with twice the diodes – two strips of 50 super bright LEDโs per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4โ thick, 1/2โ wide and 15-1/4โ long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
SKU: L58-DD-BU -
Hot Rod Wiring Products
Dummy Load Resistor for LED Lights
When using LED’s for turn signals your regular flasher doesn’t work right anymore because the LED’s don’t pull enough amperage to trigger it. This “dummy load” resistor ย wires in parallel with the LED to add the necessary amperage draw. One dummy load per side is usually sufficient. (Sold only in Pairs)
SKU: L52DL2 -
Hot Rod Exterior Lighting
Hot Slot Auxilary LED Tail Light & Turn Signal Kit
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
SKU: L63# -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Billet Third brake light, Clear Lens (L61SMC)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall Billet Third brake light, Clear Lens (L61SMC)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30ย super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
Our Small Billet Pedestal 3rd Brake Light is also 15% brighter and still with built-in turn signals. 30 super bright red LEDโs behind a clear lens with diffuser. (L61SMC)
OR
Clear lens light with 15 center red LED’s and 4 bright amber LED’s at each end. (L61SMCA)
SKU: L61SMC -
Specialty Flashers & Relays
4-Way VW Turn Signal Hazard Wiring (WI-4WX)
If you no longer have the original turn signal/4-way relay module or switch and still are using your original style taillights, this wiring will restore 4-way capability without the expense ($50 – $70!) of a new module and wiring. Also works with our Turn Signal Relay Pack if you are switching to non-separate turn signal/brake lights like 1157 bulb units. Use with your own On/Off switch or see our switch selection above. (switch not included)
SKU: WI-4WX -
Custom Marker Lights, Hot Rod Exterior Lighting
Three 1″ Auto Interior LED Lights (L86 Series)
These bright little 3-LED lights have a variety of uses. They are 1″ diameter overall and mount into a 3/4″ diameter hole. Reds and Ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L86 -
Custom Marker Lights, Hot Rod Exterior Lighting
6-LED Interior and Marker Lights, L96 Series
Great little 6-LED lights have a variety of uses. They are 1-13/16โ diameter overall and mount in a 1-3/8โ diameter hole. Red and ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L96 -
Hot Rod Exterior Lighting
Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
SKU: 23***
