2 speed plus intermittent wiper Kit Specialty Power Windows (67022)
This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built.ย This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch. ย included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
$334.00
This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built.ย This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
GT4D Modular Switches
The modular design of the switch face lets us build you a custom switch panelย toย controlย just about anything.ย Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on.ย All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4โ tall. A single switch isย 1 5/8โ long. Each additional switch adds 1 1/8โ.ย ย ย (for example a 6 switch panel is 7 3/8โ long) The toggle is 5/8โ tall.
The GT4D series include the dividers to safeguard those important circuits from accidently being switched.ย The GT3 series are without dividers. We can mix the 2 on a single panel as shown on the right.
ISO Symbols, custom engraving and black anodizing isย available upon request.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
GT4D Switches with dividers
Single GT4D switchย ย ย ย ย ย 10010โฆโฆ$145.00
Double GT4D switchย ย ย ย 10021โฆโฆ$290.00
3 switch panel of GT4D 10032โฆ..$425.00
4 switch panel of GT4D 10043โฆ..$565.00
5 switch panel of GT4D 10054โฆ..$695.00
6 switch panel of GT4D 10064โฆ..$825.00
7 switch panel of GT4D 10075โฆ..$950.00
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and we’ll price it for you.ย ย Once again, donโt forget your relays.ย We have polarity reversing, latching, single pole units to help keep your circuits
SKU: GT4D -
-
Custom Switches for Hot Rods
Universal Self-Canceling Turn Signal Kit
Our L10R and L10S switches with or without LEDโs. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10R/S-PBSC/PBLSC -
Custom Switches for Hot Rods
LED Dimmer and Knob
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. ย This dimmerย works with incandescent bulbs and LED’s.ย Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer.ย The dimmer comes with theย knob shown however it will takeย any knob with a 1/4โ shaft.ย Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM
