700R4 Lock-up Kit
700R4 Brake Switch/lock-up Got a 700R4 transmission? Got a light car and lots of power? Want to have that 700R4 convertor locked up at all times except when the brake switch is on? Here you go. Our Best Brake Switch with a SPDT relay -when the brakes are off the convertor is locked up, and when they’re on, it’s not. Just that simple and easy to install.
$49.00
700R4 Brake Switch/lock-up. Got a 700R4 transmission? Got a light car and lots of power? Want to have that 700R4 convertor locked up at all times except when the brake switch is on? Here you go. Our Best Brake Switch with a SPDT relay -when the brakes are off the convertor is locked up, and when they’re on, it’s not. Just that simple and easy to install.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Switches for Hot Rods
LED Dimmer and Knob
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. ย This dimmerย works with incandescent bulbs and LED’s.ย Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer.ย The dimmer comes with theย knob shown however it will takeย any knob with a 1/4โ shaft.ย Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM -
Custom Switches for Hot Rods
Tilt Lever Switch (L33)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. 1/4-28 threads work for GM & other applications.
This beautiful Tilt Lever contains a REAL ON/OFF switch, not just a grounding contact, to give you true switching capability. Add a 40 amp relay and use it to switch nearly anything!
And let’s not forget HI/LO Beam dimming. Our unit comes with a quality, long lasting 40 amp SPDT automotive grade relay and we stand behind this product 100% with our Satisfaction Driven Guarantee. Also works for any ON/ON circuit.
SKU: L33 -
-
Custom Switches for Hot Rods
Replacement Volkswagen Ignition Switch (V-IS)
If you’re rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole…AND if it would clear the ash tray brackets. This is a four position switch (Accessory, Off, On, Start) with a 3/4″ shank, two keys and includes ring terminals for the outputs.
SKU: V-IS
