80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Do you realize that the best ignition switches are rated for 30 amps and some for only 15 amps??? And how many amps of accessories are you using? This relay can give a full 80 amps of accessory power and take the load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches), 10 gauge wire feeds and connectors. Terrific instructions. Also great as a headlight switch relief relay or for any application that you need 80 amps of switching power.
$30.00
Do you realize that the best ignition switches are rated for 30 amps and some for only 15 amps??? And how many amps of accessories are you using? This relay can give a full 80 amps of accessory power and take the load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches), 10 gauge wire feeds and connectors. Terrific instructions. Also great as a headlight switch relief relay or for any application that you need 80 amps of switching power.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod Indicators, Relays & Flashers
Polarity Reversing Module (#L07W-25)
Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. This Reversing Module is needed when you want to use a switch that doesn’t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control).
Just 1/2″ square x 5/8″ wide – small but mighty!
SKU: L07W-25 -
Hot Rod Indicators, Relays & Flashers
Two Sets of SPDT Relay Wiring (L-RLY2)
2 SPDT RELAYS
When you want to use a remote control with a 5 wire power window type switch these relays will prevent the remote from shorting back through the 5 wire switch.ย Complete with 40 amp relays and wire leads.
SKU: L-RLY2 -
Hot Rod Wiring Products, Hot Rod Indicators, Relays & Flashers
LED Mechanical Flasher (WI-02)
We have found a less expensive alternative to our current solid state flasher. ย This flasher functions within the same amperage and life expectations of our solid state version. ย An added benefit to the mechanical flasher is that it makes the “clicking” sound we are all accustomed to when our turn signals are on. ย ย This flasher works from as little as 20ma up to 25 amps max. load. ย This is a round 2 prong flasher that is a direct fit to your current panel. ย These relays have an additional wire coming out of the top where they must be grounded. ย Round, 1 3/8″ dia. ย X 1 3/8″ tall.
SKU: WI-02
