Digital Gear Shift Sending Unit (DK-GSS3000)
Now Self Adjusting!
Dakota Digital’s universal, adjustable gear shift indicator sending unit. Works with GM TH350, TH400, 700R4, 4L60, 4L80, and powerglide; Ford C-4, C-6 and AOD; Mopars and many others. Full electronic adjustability from inside the car – no magnets to align. Built-in neutral safety switch and reverse back-up light circuits. Comes complete with mounting hardware pack, electronic sending unit, and gear shift decoder. Works perfectly with StreetWorks LED Gear Shift Indicator Lights and Combination LED Turn Signal/ High Beam Shifter Indicator Lights.
$119.95
Now Self Adjusting!
Dakota Digital’s universal, adjustable gear shift indicator sending unit. Works with GM TH350, TH400, 700R4, 4L60, 4L80, and powerglide; Ford C-4, C-6 and AOD; Mopars and many others. Full electronic adjustability from inside the car – no magnets to align. Built-in neutral safety switch and reverse back-up light circuits. Comes complete with mounting hardware pack, electronic sending unit, and gear shift decoder. Works perfectly with StreetWorks LED Gear Shift Indicator Lights and Combination LED Turn Signal/ High Beam Shifter Indicator Lights.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Switches for Hot Rods
Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. ย Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L75TS-XX -
Specialty Flashers & Relays
Power Cowl Vent Kit (L34)
Give your cowl vent a lift with this powerful gear motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. Steel bracket for cowl can be bolted or welded. Attractive 5″ aluminum rod arm gives a clean look. Motor with mounting bracket and lever arm measure 2-1/2″ wide, 4″ high and 3-1/4″ deep including motor, not including 5″ connecting arm. Also works for power glove box door.
The motor is not waterproof.
SKU: L34 -
Specialty Flashers & Relays
Turn Signal Indicator Diode (V- TSID)
Allows you to use one indicator light (like original VW) to show you that either the left turn, right turn or 4-way flashers are blinking. Both left and right “sides” feed through diodes to feed one light. 1 amp maximum load.
SKU: V- TSID -
Specialty Flashers & Relays
Programmable Electric Fan Controller
Dakota Digital’s PAC-2750 was designed for the ultimate in flexibility, and to be a simple add-on for electric fan(s). l 70 amp relay included. Fully programmable. Will work with your existing water temp gauge, operating from the temperature sending unit already installed! or a dedicated sending unit can be installed. Features fully programmable “fan on” and “fan off” temperatures to suit any application or personal preferences. Can leave the electric fan operating after the engine has been shut down for a user adjustable time. Full digital LED readout for displaying temperature readings and maintaining simple installation. Operating range: 150F – 250F. 3″ X 2.75″ X 1″ thick.
SKU: DK-PAC2750
