GT2 Modular Switches (No Dividers) Power Windows and or Locks


These are our all new GT2 switches.  These switches are sold for use as a power window switch however can be used for virtually anything UPON REQUEST.  These all new switches have a slim fit and finish to prevent getting snagged when mounted on the door or console of your vehicle.  They have the same design as the GT3 and GT4D panels so they will match the rest of your switches.

IF YOU ARE WIRING A 2 SWITCH PANEL ON THE DRIVERS DOOR AND A SINGLE SWITCH PANEL ON THE PASSENGER DOOR ORDER THE TRIPLE KIT.

Single GT2 switch with reversing module                                                                        10219……$  89.00

Double GT2 switch with reversing module                                                                       10220……$149.00

Triple kit GT2 (Comes with a Double and a Single panel with reversing modules)                10231…..$219.00

The modular design of the switch face lets us build you a custom switch panel  to  control  just about anything.  Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.

The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on.  All switches are rated at 5 amps so you may want relays for heavy loads. (see page 41) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is  1 5/8” long. Each additional switch adds 1 1/8”.    (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.

The GT4D series include the dividers to safeguard those important circuits from accidentally being switched.  The GT3 series are without dividers.  The GT2 series switches are without dividers have a short rocker so to not interfere while on your door and include polarity reversing modules(intended for power windows / locks but we can still make these however you would like).

Don’t know if you have Polarity reversing Motors?  See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.

$89.00$219.00

Clear

These are our all new GT2 switches.  These switches are sold for use as a power window switch however can be used for virtually anything UPON REQUEST.  These all new switches have a slim fit and finish to prevent getting snagged when mounted on the door or console of your vehicle.  They have the same design as the GT3 and GT4D panels so they will match the rest of your switches.

IF YOU ARE WIRING A 2 SWITCH PANEL ON THE DRIVERS DOOR AND A SINGLE SWITCH PANEL ON THE PASSENGER DOOR ORDER THE TRIPLE KIT.

Single GT2 switch with reversing module                                                                        10219……$  89.00

Double GT2 switch with reversing module                                                                       10220……$149.00

Triple kit GT2 (Comes with a Double and a Single panel with reversing modules)                10231…..$219.00

The modular design of the switch face lets us build you a custom switch panel  to  control  just about anything.  Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.

The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on.  All switches are rated at 5 amps so you may want relays for heavy loads. (see page 41) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is  1 5/8” long. Each additional switch adds 1 1/8”.    (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.

The GT4D series include the dividers to safeguard those important circuits from accidentally being switched.  The GT3 series are without dividers.  The GT2 series switches are without dividers have a short rocker so to not interfere while on your door and include polarity reversing modules(intended for power windows / locks but we can still make these however you would like).

Don’t know if you have Polarity reversing Motors?  See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.

Weight 0.00000000 lbs
Dimensions 0.00000000 × 0.00000000 × 0.00000000 cm
Switch Type

Double GT2 Switch with Reversing Modules, Single GT2 Switch with Reversing Module, Triple GT2 Switches with Reversing Modules

Product Instructions

View or Download the Product Instructions

10219.pdf 10220.pdf 10231.pdf What-is-a-Polarity-Reversing-Motor.pdf