Headlight Switch (AA-HLS2)
This is a high quality GM style switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob that matches our Dress-up Knobs #B14TN-X. ย The switch is rated at 25 amps.
$45.00
This is a high quality GM style switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob that matches our Dress-up Knobs #B14TN-X. ย The switch is rated at 25 amps.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Knob Type | Contemporary, Turned |
Related products
-
Custom Switches for Hot Rods
LED Dimmer and Knob
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. ย This dimmerย works with incandescent bulbs and LED’s.ย Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer.ย The dimmer comes with theย knob shown however it will takeย any knob with a 1/4โ shaft.ย Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM -
Custom Switches for Hot Rods
700R4 Lock-up Kit
700R4 Brake Switch/lock-up Got a 700R4 transmission? Got a light car and lots of power? Want to have that 700R4 convertor locked up at all times except when the brake switch is on? Here you go. Our Best Brake Switch with a SPDT relay -when the brakes are off the convertor is locked up, and when they’re on, it’s not. Just that simple and easy to install.
SKU: L08-700R4 -
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
Custom Switches for Hot Rods
PressTech Touch Pad Switch (L32PS)
A brand new way to activate door solenoids or actuators. This small, 1″ x 1″ x 1/8″ thick pad switch can be hidden in the neatest places. Put it under upholstery, inside a fender lip or mirror housing, almost anywhere and activate it with a simple press. Fully waterproof pad switch comes with quality 3M tape for mounting.
Please Note: If using solenoids or for loads over 2 amps, see our relay section part #L07-40.
Remember – Keylock security can be used with any Entry Triggering Systems.
SKU: L32PS
