This is a high quality GM style switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob that matches our Dress-up Knobs #B14TN-X. The switch is rated at 25 amps.
Headlight Switch (AA-HLS2)
This is a high quality GM style switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob that matches our Dress-up Knobs #B14TN-X. The switch is rated at 25 amps.
$45.00
Weight | 0.00000000 lbs |
---|---|
Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
Knob Type | Contemporary, Turned |
Related products
-
Custom Switches for Hot Rods
GT3 Custom Toggle Switches (No Dividers)
0 out of 5(0)The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. GT2 switches are “stubby” rockers without dividers. We can mix the 3 on a single panel.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and will price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits safe.
SKU: GT3$115.00 – $715.00 -
Custom Switches for Hot Rods
Replacement Volkswagen Ignition Switch (V-IS)
0 out of 5(0)If you’re rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole…AND if it would clear the ash tray brackets. This is a four position switch (Accessory, Off, On, Start) with a 3/4″ shank, two keys and includes ring terminals for the outputs.
SKU: V-IS$37.00 -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
GT4D Modular Switches
0 out of 5(0)The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidently being switched. The GT3 series are without dividers. We can mix the 2 on a single panel as shown on the right.
ISO Symbols, custom engraving and black anodizing is available upon request.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
GT4D Switches with dividers
Single GT4D switch 10010……$145.00
Double GT4D switch 10021……$290.00
3 switch panel of GT4D 10032…..$425.00
4 switch panel of GT4D 10043…..$565.00
5 switch panel of GT4D 10054…..$695.00
6 switch panel of GT4D 10064…..$825.00
7 switch panel of GT4D 10075…..$950.00
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and we’ll price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits
SKU: GT4D$145.00 – $950.00 -
Custom Switches for Hot Rods
2 speed plus intermittent wiper Kit Specialty Power Windows (67022)
0 out of 5(0)This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built. This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch. included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
SKU: 67022$334.00