Flush Mounted LED Lights
Taillights with Separate Amber Turn Signals If you have turn signals that are separate from the brake lights, this kit is exactly what the doctor ordered. Each light has 40 super bright red LED’s that handle the taillight and brake light functions, plus an additional 12 super bright amber LED’s that are dedicated for turn signals. They are all mounted inside a ready-to-mount aluminum housing. The lenses are 1/4″ thick build-in, flush mount units that measure 15-1/4″ long X 1/2″ wide clear acrylic with prismatic diffusers. Please note that these are build-in lights that require paint and body skills. Not all vehicles with separate turn signals are adaptable to LED lights. Call or email us to discuss your application.
$219.00
Taillights with Separate Amber Turn Signals If you have turn signals that are separate from the brake lights, this kit is exactly what the doctor ordered. Each light has 40 super bright red LED’s that handle the taillight and brake light functions, plus an additional 12 super bright amber LED’s that are dedicated for turn signals. They are all mounted inside a ready-to-mount aluminum housing. The lenses are 1/4″ thick build-in, flush mount units that measure 15-1/4″ long X 1/2″ wide clear acrylic with prismatic diffusers. Please note that these are build-in lights that require paint and body skills. Not all vehicles with separate turn signals are adaptable to LED lights. Call or email us to discuss your application.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
-
Hot Rod Exterior Lighting
Bullet Beehive LED Taillights w/ Billet Base (L84)
Beehive lights are now available in large and small sizes
’50’s styling with 21st century technology. Each light has Super Bright Red & Orange LED’s in a Beehive light that has a neat star pattern. Machined Billet Base provides a high-tech finishing touch. Easily mounted to a flat surface using the hardware provided – only three holes needed to install. Dual intensity converter included. ย Use as a pair or in groups of four or six for that classic taillight look. These lights meet DOT/SAE requirement J592e and are so marked. ย Sold in pairs.
Overall dimensions for the original large beehives are 2-3/4″ dia. at the baseย x 2-7/8″ tall. The new smallย units are 2-1/4″ dia. at the base x 2-1/8″ tall
SKU: L84 -
Hot Rod Exterior Lighting
1156 White LED White Bulbs, Pair (EL-56W)
Finally, an 1156ย LED replacement bulb that can be seen from all directions. These single element bulbs will work in your existing sockets. ย It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ยผโ long by ยพโ wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service.ย Sold in pairs.
SKU: EL-56W -
Custom Marker Lights, Hot Rod Exterior Lighting
4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
Custom Marker Lights, Hot Rod Exterior Lighting4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
The amber light has 12 super bright amber LEDโs. The red light has 15 super bright red LEDโs Both lights have clear lenses (4-1/4โ long, 1/2โ wide, 1/4โ deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
SKU: L89
