LED Light’N Boltz License Plate Light Assembly Kit
Polished Stainless Steel Dome-head bolts with LED’s to illuminate your license plate. 5/16-18 x 3/4″ threaded bolts. 2 dome-head mounting/illumination bolts with LED’s plus 2 button-head mounting bolts without LED’s. Includes nuts, wire leads. 12 vdc. Set of four as shown. From Design Engineering Inc.
$36.50
Polished Stainless Steel Dome-head bolts with LED’s to illuminate your license plate. 5/16-18 x 3/4″ threaded bolts. 2 dome-head mounting/illumination bolts with LED’s plus 2 button-head mounting bolts without LED’s. Includes nuts, wire leads. 12 vdc. Set of four as shown. From Design Engineering Inc.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Marker Lights, Hot Rod Exterior Lighting
Three 1″ Auto Interior LED Lights (L86 Series)
These bright little 3-LED lights have a variety of uses. They are 1″ diameter overall and mount into a 3/4″ diameter hole. Reds and Ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L86 -
Car Interior LED Lights
White or Blue Low Profile Illuminator LED
Use these 3/8″ square, surface mount LEDs for interior accent lighting, license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. These low profile lights can be put just about anywhere you want with the double sided adhesive we include. Available in blue or white. 100% Weatherproof.
SKU: L91 -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet little LED Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included. Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85
