Installation Kit for Neat Nobs
Allows you to install StreetWorks Neat Nobs away from the latch and door jam, forward on the door where the original inside handle was. A “T” lever and cable are used to attach to the latch. Once installed, a simple push on the nob actuates the latch. Our kit works in either steel or fiberglass cars and has all of the hardware you need to connect a Neat Nob kit to gator-jaw style latches. Detailed drawing and written instructions included.
$17.95
Allows you to install StreetWorks Neat Nobs away from the latch and door jam, forward on the door where the original inside handle was. A “T” lever and cable are used to attach to the latch. Once installed, a simple push on the nob actuates the latch. Our kit works in either steel or fiberglass cars and has all of the hardware you need to connect a Neat Nob kit to gator-jaw style latches. Detailed drawing and written instructions included.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Remotes & Keyless Entry Systems
Quadra 4 Function Remote Control with 3 Transmitters (L-QD4)
Ourย Quadra remote control has four functions – perfect for 2 power windows up-and-down. Or use it to open two doors or other operations plus 2 more functions for trunk release, battery disconnect, etc. Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes (2) built-in 30 amp relays for Channels #1 and #2 plus (2), 40 amp external relays for Channels #3 and #4. 12 ga. power wire leads. Built-in fuse holder with fuses. Pre-wired for Channel #1 and #2 backup switches (switches not included). Wow! It has (3), 4 button transmitters – a button for each function! Optional ignition disable. Connectors, great instructions… and it’s from StreetWorks so you know it’s good.
SKU: L-QD4 -
Releases
Thin Oval Neat Nob Latch Release Kits
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOB (with Ball Nobs on right in photo)
SKU: B14NOB -
Automotive Battery Disconnect Switches & Kits
Battery Disconnect For Remote Controls (L27R)
Use that extra remote control channel (just one momentary switch) to shut off the battery from outside the car. Push it once and the battery is connected. Push it again and the battery feed is disconnected. Includes our auxiliary “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is no electricity used when this unit is ON or OFF, only while switching. Remote not included.
SKU: L27R -
Cables and Cable Releases
Emergency Door Release Kit (TP-BKD-1)
Even the very best electrical entry systems could go bad. This Emergency Door Release Kit gives you the mechanical back-up way to trip the driver door latch and get into your car. Kit contains 8+ feet of encased cable, stainless steel braided door wire loom with billet ends to run the cable through and into the door, billet pull knob with set screw, cable clips and mounting hardware. Easily run into the engine compartment or under a fender well. Why leave yourself unprotected? Made in America by Itsashoka Innovations.
SKU: TP-BKD-1
