Oval Dimpled Power Window Switch Kit for 4 Regulators (L39BO4X)
Now with either Dimpled or Paddle Rockers
Our distinctive Oval Switches can be used for a lot more than just power windows. We can custom make a panel for you. We offer Momentary On/Off, On/Center Off/On, or Momentary On/Center Off/Momentary On switches. The panel measures 4-7/8″ wide by 1-5/8″ high.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
The switches are rated at 5 amps max. If using for POWER WINDOWS you will need a polarity reversing module. Give us a call or email us to find out everything you might need with this switch panel.
$290.00 – $310.00
Now with either Dimpled or Paddle Rockers
Our distinctive Oval Switches can be used for a lot more than just power windows. We can custom make a panel for you. We offer Momentary On/Off, On/Center Off/On, or Momentary On/Center Off/Momentary On switches. The panel measures 4-7/8″ wide by 1-5/8″ high.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
The switches are rated at 5 amps max. If using for POWER WINDOWS you will need a polarity reversing module. Give us a call or email us to find out everything you might need with this switch panel.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Finish | Brushed Finish, Raven Black Finish |
| Rocker Type | Rectangular Double, Dimpled, Rectangular Double, Paddle |
Product Instructions
View or Download the Product Instructions
L39BO4X.pdf What-is-a-Polarity-Reversing-Motor.pdfYou may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
3 Switch Panel
A single location (console) 3 switch control panel that measures 4″ wide by 1 -5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. Please use relays if you’re 5 amps or more. Polarity reversing modules are required for 2 wire non grounded window kits.
SKU: L39BO3X -
Hot Rod Power Window Switches
Double Billet Power Window Switch (L39BD#), Rectangle
Our dual power window rocker switch sits inside an billet frame that’s only 2″ wide by 1-3/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only.
Kit includes: Dual switch frame with swithes, (2) polarity reversing modules, wire leads and instructions.
Available with either a dimpled or paddle style rocker. Switch and frame have a brushed aluminum finish.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BD# -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
3 Wire Power Window Switch Kit for 4-Door Car
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches3 Wire Power Window Switch Kit for 4-Door Car
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with either dimpled or paddle rockers. Comes with a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors. Includes polarity reversing modules, wiring connectors switches and panels with instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DR -
Hot Rod Power Window Switches
Oval Billet Power Window Toggle Switch
Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
SKU: L39BO
