1/4″ skinny lens is no longer available. Please see item #L58SMBT
Out of stock
1/4″ skinny lens is no longer available. Please see item #L58SMBT
$105.00
Out of stock
1/4″ skinny lens is no longer available. Please see item #L58SMBT
Weight | 0.00000000 lbs |
---|---|
Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
NEW AND IMPROVED! Our new 2mm version of damping material is 33% thicker than our original material.
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and it’s strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in a variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
Applications
What’s in it for you…
|
Where to use:
|
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached. The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
Metal Toggle Switch, 7/8” long for right or left turn indication, center off. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. (bottom right in photo)
Double-D taillights with twice the diodes – two strips of 50 super bright LED’s per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4” thick, 1/2” wide and 15-1/4” long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.