1/4″ skinny lens is no longer available. Please see item #L58SMBT
Out of stock
1/4″ skinny lens is no longer available. Please see item #L58SMBT
$105.00
Out of stock
1/4″ skinny lens is no longer available. Please see item #L58SMBT
Weight | 0.00000000 lbs |
---|---|
Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
These lights are a sharp and simple option for courtesy lighting. The light is a nice neutral white that will illuminate your whole foot box. Simply drill a center hole and screw it down in place, then push the front cover on. Dimensions are 3″ wide by 2″ tall. Price is for a pair.
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
Double-D taillights with twice the diodes – two strips of 50 super bright LED’s per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4” thick, 1/2” wide and 15-1/4” long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
NEW AND IMPROVED! Our new 2mm version of damping material is 33% thicker than our original material.
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and it’s strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in a variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
Applications
What’s in it for you…
|
Where to use:
|