StreetWorks Door Solenoids More power. Fast action. 40 pounds of pull. Work with original latches. Solenoid and bracket measure 2-3/4″ wide by 2-1/16″ high (thick) by 4-1/4″ long. Solenoids & bracket(s) Only and instructions.
| # Solenoids w/Bracket Only | 2 Solenoids w/Brackets Only, 1 Solenoid w/Bracket Only |
|---|
You may also like…
-
Remotes & Keyless Entry Systems
Cable Installation Kit for Door Solenoids (L22C)
Why scrounge through hardware stores for the rest of the “kit” that those guys don’t sell? This kit puts together all of the little parts to connect actuators or solenoids to latches… for less than 12ย bucks! Includes 30″ of aircraft cable, a delrinยฎย pulley, wire stay, pulley mounting hardware, cable ends and instructions. Don’t waste time and money – get our kit and make your life a little easier.
SKU: L22C (One Door) -
Remotes & Keyless Entry Systems
StreetWorks Door Solenoids (L22N)
You want more power. You want fast action. StreetWorks Solenoids have it. They work the way you want, with 40 pounds of pull so they work with original latches. Solenoids, cables, pulleys, connectors, wire hardware and instructions. Solenoid and bracket measure approximately 2-3/4″ wide x 2-1/16″ high (thick) x 4-1/4″ long.
If you need more power than these solenoids have, you have a door problem.
SKU: L22N
Related products
-
Remotes & Keyless Entry Systems
Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
SKU: L22-BS -
Hood and Trunk Hinges
Power Trunk Lift Kit 200# Actuator (CA-PTL200)
Carolina Custom’s Power Trunk Lift Kits
Power Trunk Lift Kit 200# Actuator
Uses an industrial linear actuators for power – not just a window regulator. Works through a single pivot hole so there’s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk.
SKU: CA-PTL200 -
Remotes & Keyless Entry Systems
MagTech Magnet Entry System (L20)
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
SKU: L20 -
Hood and Trunk Latches
Trunk Lid Latch (D04)
We’ve seen this neat little latch showing up on some of the most eye-catching rods. Cable release ready receiver measures 2-3/8″ x 3-5/16″ wide. The spring loaded stud is 2-3/4″ long, overall, and the adjustable spring loading helps to pop the trunk lid up. The latch has a built-in safety feature requiring cable tension for the latch to close. The finish is zinc yellow chromate. You’ll have to fabricate brackets/supports for attaching both pieces but we know you can do it!
SKU: D04
