Switched Dome Light (L82)
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
$59.00
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet littleย LEDย Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included.ย Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Courtesy Lights, Car Interior LED Lights
LED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Courtesy Lights, Car Interior LED LightsLED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Trique’s Oval Interior Light is machined from a solid piece of billet aluminum and houses (6) 5mm cool white L.E.D’s behind a dome shaped lens. Each interior light comes fully polished. This interior light features a radius bezel to match many of our other interior components. ย Comes with the mounting bracket.
- Billet Aluminum
- LED Light
- Soft white light versus dingy yellow light
- Comes with mounting bracket
- Made in the USA
Dimensions:
- Footprint = 4.25″ X 1.75″
- Bezel = 5.25″ X 2.125″
- Required depth = .55″
SKU: TQ-OIL*
Related products
-
Car Interior LED Lights
Glove Box/Trunk tilt Switch Kit (L03)
Turns on lights in your glove box, trunk or under yourย hood. Kit includes the switch, mounting screw, and a bright warm white LED strip. The tilt switch has a clear plastic housing to check its operation. The LED strip has adhesive tape for easy and strong mounting.
SKU: L03 -
Car Interior LED Lights
White or Blue Low Profile Illuminator LED
Use these 3/8″ square, surface mount LEDsย for interior accent lighting, license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. These low profile lights can be put just about anywhere you want with the double sided adhesive we include. Available in blue or white. 100% Weatherproof.
SKU: L91 -
Car Interior LED Lights
Replacement LED Gauge Bulbs
A quality plug and play bulb designed to be a direct replacement for you current gauge lighting. ย These bulbs are the correct brightness for gauges however not suggested for Exterior lighting applications. ย These bulbs are a direct replacement for #57 bulb styles and similar. ย Available in Amber, Blue, Green,ย Red and White sold in pairs.
SKU: IL-57# -
Courtesy Lights, Car Interior LED Lights
Bright White Illuminator LED Interior Accent Lighting
A little bigger and a little brighter than the Bright Blue LED. Use for interior accent lighting (not for courtesy or dome lights), license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. It’s small size makes it easy to snap into a 1/4″ diameter hole or just RTV or epoxy in place. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRW-1/4
