Shop
Showing 1–20 of 349 results
-
Cables and Cable Releases
Street Rod Dual Pull Lever Cable Releases (CC-D72)
Our dual pull lever cable release for hot rod cars. This aluminum dual pull lever comes with one 84-inch cable & one 144-ince cable that can pop two hood latches at once. Shop for street rod dual pull lever cable releases online at Watson’s StreetWorks! Made right here in America.
SKU: CC-D72 -
Automotive Door Latches & Parts, Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry Systems
True Aero Electronic Flush Mount Car Door Handles (ET-TA)
Automotive Door Latches & Parts, Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry SystemsTrue Aero Electronic Flush Mount Car Door Handles (ET-TA)
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The kit includes;
2 weld in door handle pockets
The door handles that unscrew from the pocket for body work. (also the activation switch comes out)
RFID Security Module
2 Relay modules that cutoff the pulse to your solenoid after a half second so your solenoid doesn’t burn out as you are pulling your door open.
Waterproof backup switch that will work even if you lose your RFID Fob.
*Solenoids are sold separately per your latch pulling needs*
SKU: ET-TA -
Hot Rod & Automotive Interior Display Trim
Backup Monitor Console Camera
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-TH -
Hot Rod & Automotive Interior Display Trim
License Plate Mounted Backup Camera Monitor (IT-MON-LP)
A Backup Screen for Your Console!
When we introduced our mirror /screen backup system it was a huge success but many folks need a unit for their center console. Well here it is. The large 5″ screen is mounted in a billet frame measuring 5-¼” wide by 4″ tall. You will need less than an inch of backspace. Sold with either a through hole or license plate mounted camera.
SKU: IT-MON-LP -
Hot Rod Indicators, Relays & Flashers
C4 Relay Pack (WI-C4)
- 4 relays in a single compact unit
- Each 30 amp relay is double throw.
- Hot or ground trigger
- Relays can be linked for special functions
- No programing, just set a few onboard switches
- Instructions show several relay combo circuits
- Great for upgrading to new sleek switches
- ID your circuits right on the cover
SKU: WI-C4 -
Hot Rod Indicators, Relays & Flashers
Polarity Reversing Module (#L07W-25)
Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. This Reversing Module is needed when you want to use a switch that doesn’t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control).
Just 1/2″ square x 5/8″ wide – small but mighty!
SKU: L07W-25 -
Car Interior LED Lights, Courtesy Lights
LED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Car Interior LED Lights, Courtesy LightsLED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Trique’s Oval Interior Light is machined from a solid piece of billet aluminum and houses (6) 5mm cool white L.E.D’s behind a dome shaped lens. Each interior light comes fully polished. This interior light features a radius bezel to match many of our other interior components. Comes with the mounting bracket.
- Billet Aluminum
- LED Light
- Soft white light versus dingy yellow light
- Comes with mounting bracket
- Made in the USA
Dimensions:
- Footprint = 4.25″ X 1.75″
- Bezel = 5.25″ X 2.125″
- Required depth = .55″
SKU: TQ-OIL* -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet little LED Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included. Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85 -
Car Interior LED Lights
Switched Dome Light (L82)
A modern car feature for your favorite ride NOW IN LED. This attractive dome light has a switch built right into the lens. Convenient size is just 4-1/2″ X 2-1/2″, snaps into place – a hole template is provided. Bulbs and 24″ pre-wired leads included. Tan colored plastic housing fits into most interior motifs. In this photo, the switch is at the right hand end of the lens.
SKU: L82 -
Custom Switches for Hot Rods
Custom Automotive Switches
We’ve been working with builders for 30 years and know that no 2 builds are identical.
Every builder wants to customize and personalize their project.
One of the most prominent ways to display your own personality is in the switch panel you use.
Once you decide on the functions of the switches, you can further personalize them with engraving, lighting, brushed or polished or black anodized finish.
Mixing and matching the finish is another creative option.
The following pictures are a sampling of the many ways customers have personalized their switch panels.
We can engrave with symbols or words or just about anything else you want.
Call us to discuss how we can turn your ideas into reality and build a custom panel that is as unique as your ride!
SKU: n/a -
Custom Switches for Hot Rods
GT3 Custom Toggle Switches (No Dividers)
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. GT2 switches are “stubby” rockers without dividers. We can mix the 3 on a single panel.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and will price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits safe.
SKU: GT3 -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
GT4D Modular Switches
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidently being switched. The GT3 series are without dividers. We can mix the 2 on a single panel as shown on the right.
ISO Symbols, custom engraving and black anodizing is available upon request.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
GT4D Switches with dividers
Single GT4D switch 10010……$145.00
Double GT4D switch 10021……$290.00
3 switch panel of GT4D 10032…..$425.00
4 switch panel of GT4D 10043…..$565.00
5 switch panel of GT4D 10054…..$695.00
6 switch panel of GT4D 10064…..$825.00
7 switch panel of GT4D 10075…..$950.00
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and we’ll price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits
SKU: GT4D -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 2 Rocker Car Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, Double switches are 2-1/2″ long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $184.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp 3 Custom Rocker Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, 3 switch face is 3-5/8″long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $280.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 4 Toggle Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, 4 switch face is 4-3/4″ long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $357.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom Toggle Switch
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, single switches are 1-3/8″wide. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $110.
SKU: n/a
