Shop
Showing 201–220 of 349 results
-
Automotive Door Latches & Parts
Gator-Jaw Medium weld in plates (L24M)
Weld these plates to your door to give a strong, solid mounting point for your latches. Installation screws – 1/4-20 x 3/4 S/S button socket screws. Available for either full size gator jaws or our mini’s. Sold in pairs.
SKU: L24M -
Hot Rod Wiring Products
H4 Headlight Harnesses (EL-HLP)
Are your 3 prong headlight haresses tired and falling apart? Pick up a pair of new harnesses with connectors and make sure you never lose your lights at night. Comes with 2 3 prong harnesses pre-wired with pigtails, connectors and instructions.
SKU: EL-HLP -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Custom Door Hardware, Windows Cranks & Switch KnobsBillet Switch Nut with O-Ring for Headlight Switch (B-HLSN)
Have that headlight switch match with our ignition switch by adding a Billet Headlight Switch Nut with O-Ring. Perfect for part #AA-HLS. Has 7/16 – 28 thread and .203 Dia center hole.
SKU: B-HLSN -
Specialty Flashers & Relays
Headlight Reminder Buzzer (32021)
There is nothing as embarrassing to a car guy as a dead battery because you left your lights on. This kit sounds our new Buzzer and the center lights red reminding you your lights are on but the key is either out of the ignition or in the off position. The kit includes the Buzzer, Module, and wiring instructions. Mounts in a 3/4″ hole and the chrome bezel is 7/8″
SKU: 32021 -
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Remotes & Keyless Entry Systems
Hot Dot Remote Ignition Link
A great way to mount our L75 series switches – put an Ignition switch and an Accessory switch side-by-side. The plate is 1″ wide x 2″ long and secures with the switch nuts. L75 switches sold separately. This Ignition Link Relay allows you to enable and disable your StreetWorks Hot Dot Ignition Button using two (2) functions on a Remote Control (such as our Gemini, 2-function or other remote control). Push one remote control button and the Hot Dot Ignition operates, press a second button and disable the Hot Dot. Takes the place of a keylock to secure your car’s ignition. May be triggered by either positive or negative (grounding) momentary trigger signals. Remote Controls and Hot Dot sold separately. Can also be used as a latching On/Off relay, 12 vdc, 5 amps maximum load.
SKU: L88 -
Hot Rod Ignition Switch Systems, Hot Rod Ignition Switches
Aftermarket Ignition Switch with Billet O-Ring Nut (L47)
Hot Rod Ignition Switch Systems, Hot Rod Ignition SwitchesAftermarket Ignition Switch with Billet O-Ring Nut (L47)
We have seen a lot of really nice cars using the aftermarket ignition switch and the cast, ribbed nut that comes with it. That nut made the whole dash look cheap! So, let’s fix that. Here is a quality ignition switch with 30 amp rating. Four positions -Accessory, Off, On and Start. 2 keys. Die-cast housing and mounting stem that’s 3/4″ diameter x 3/4″ long. AND it has an attractive machined billet nut with decorative black O-ring. The perfect complement to our Contemporary Column nobs.
SKU: L47 -
-
Custom Switches for Hot Rods
Replacement Volkswagen Ignition Switch (V-IS)
If you’re rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole…AND if it would clear the ash tray brackets. This is a four position switch (Accessory, Off, On, Start) with a 3/4″ shank, two keys and includes ring terminals for the outputs.
SKU: V-IS -
Custom Switches for Hot Rods
On-Off Pull Switch (L-PS)
Pull On, Push Off. This ain’t rocket science, but it’s a nice little switch. Rated 20 amps. Fits through a 1/2″ Dia. hole. Comes with a black knob,and a chrome trim rig/nut. Use any of our 10-32 dress-up knob fit for a better look Also available is a billet trim ring.
SKU: L-PS -
-
Hot Rod Cup Holders
Illuminated Medium Natural Aluminum Cup Holders (IT-MAC#)
We have added the option for accent lighting on all of our cup holders. Here are our medium natural aluminum cup holders that measure 3 1/4″ ID by 3″ deep with a 4” flange. These are available in your choice of Amber, Blue, Green, Red or White.
SKU: IT-MAC# -
Car Interior LED Lights
Interior Replacement LED Festoon Bulbs (IL-8#B)
We are now selling replacement LED Festoon Bulbs. These are the same great units that come in our very own products. Please verify size before purchasing.
The IL-82B has a working dimension for clip in style festoon sockets of 1″ – 1 1/2″. The minimum distance between the bulb clips on your light cannot be any smaller than 1″
The IL-85B has a working dimension for clip in style festoon sockets of 3/4″ – 1 1/8″. The minimum distance between the bulb clips on your light cannot be any smaller than 3/4″
SKU: IL-8#B
