Shop
Showing 221–240 of 349 results
-
Hot Rod Indicators, Relays & Flashers
Latching Double Throw Relay (30018)
This is just what you need to control your Hi/Lo headlight circuit.ย Once triggered by a momentary switch, it stays latched in that position.ย Trigger it again and it switches to the other position.ย The trigger circuit is ground on this relay.ย Kit includes lead wires and instructions.
**Works great with our 5 wire window switches**
SKU: 30018 -
-
Hot Rod Indicators, Relays & Flashers
Circuit Status Indicator Relay Kit
Ever have a circuit that you wanted specific feedback about – as to when it turned ON and OFF? This Relay kit, along with two indicator lights (not included) will give you that information. Our kit contains the relay, 24″ wire leads, and instruction for use. Works great for radiator fans, battery disconnects, fuel pump, etc. Use with any of our LED indicator lights (for example: green = ON, red = OFF) to provide positive, visual status indication (lights not included).
SKU: L07D-IND -
Car Interior LED Lights
Replacement LED Gauge Bulbs
A quality plug and play bulb designed to be a direct replacement for you current gauge lighting. ย These bulbs are the correct brightness for gauges however not suggested for Exterior lighting applications. ย These bulbs are a direct replacement for #57 bulb styles and similar. ย Available in Amber, Blue, Green,ย Red and White sold in pairs.
SKU: IL-57# -
Car Interior LED Lights
194 / 168 Replacement LED Bulbs for Gauge Lighting (IL-194X)
A quality plug and play bulb designed to be a direct replacement for you current gauge lighting. ย These bulbs are the correct brightness for gauges however not suggested for Exterior lighting applications. ย These bulbs are a direct replacement for 161, 168, 193, 194 bulb styles. ย Available in Amber, Blue, Red and White sold in pairs.
SKU: IL-194X -
Hot Rod Wiring Products
LED Conversion Kit
Make any singleย intensity (BRIGHT ONLY) LED strip dual intensity (DIM andย BRIGHT) with one of these conversion kit. You will need one per strip depending on how many LED you have in each light. The L-JE02 Is rated for 25-60 RED LED’s and 12-32ย Amber LED’s. The L-JE03 Is rated for 5-20 RED LED’s and 4-8 AMBER LED’s. The L-JE01’s are used for Incandescent bulbs. NOTE These conversion kits are intended for use with our LED strips only. They will work with other manufacturerโs LED’s but we DO NOT guarantee that they will work.
SKU: L-JE0# -
Custom Switches for Hot Rods
LED Dimmer and Knob
All new LED on/off and full range dimmer rated at 6 amps max and no minimum amount of draw is required. ย This dimmerย works with incandescent bulbs and LED’s.ย Dim either LED, incandescent or both types of lighting simultaneously with this one dimmer.ย The dimmer comes with theย knob shown however it will takeย any knob with a 1/4โ shaft.ย Requires wiring both the power and ground leads through the unit for operation.
SKU: WI-DIM -
Hot Rod Wiring Products
Dummy Load Resistor for LED Lights
When using LED’s for turn signals your regular flasher doesn’t work right anymore because the LED’s don’t pull enough amperage to trigger it. This “dummy load” resistor ย wires in parallel with the LED to add the necessary amperage draw. One dummy load per side is usually sufficient. (Sold only in Pairs)
SKU: L52DL2 -
Automotive Battery Disconnect Switches & Kits
Magtech Battery Disconnect (L27M)
“Instant ON, Instant OFF” A simple wand-like swipe with the magnet “key” makes it that easy to disconnect your battery with our MagTech Battery Disconnect kit. A hidden switch is activated by the magnet key carried on your key ring. Great as an anti-theft deterrent or to prevent battery drain. Includes our auxiliaryย “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is NO electricity used when this unit is “on”, only when switching between on and off.
SKU: L27M -
-
Hot Rod Wiring Products
Maxi Fuse Fusible Link and Connectors
This kit allows you to replace the fusible links that normally protect the main power feeds from the battery and alternator with Maxi-Fuses. Perfect for rewiring jobs. Maxi fuses are easy to detect, easy to replace fuses. Our kit has 2 maxi-fuse holders with 8 ga. wire leads and waterproof covers, (3)-50 amp maxi fuses plus connectors and tie wraps. Also use for any high amperage add-on circuits. NOTE: Maxi fuses are not slow burn like fusible links.
SKU: L46 -
Wire Routing for Hot Rods
Giant Street Rod Door Plastic Wire Looms (P-GWL)
These plastic wire looms for door jams are 25/32″ O.D. x 9/16″ ID. x 9+” long. Fixed grommet at one end for the door jam. Sliding grommet for the other end goes into the door. Fits up to 9 12ga. wires.ย Requires 1 1/16″ Diameter holes. Hot rod black.
SKU: P-GWL (2 door pair)-1 -
Wire Routing for Hot Rods
Medium Plastic Wire Looms (P-MWL)
These plastic wire looms for door jams are 5/8″ O.D. x 3/8″ ID. x 7+” long. Fixed grommet at one end for the door jam. Sliding grommet for the other end goes into the door. More than twice the wire capacity as 1/4″ I.D. tubing. Requires 3/4″ and 7/8″ Diameter holes. Hot rod black.
SKU: P-MWL (2 door pair) -
Automotive Door Latches & Parts
Mini-Gator-Jaw Latches (L24E)
Hey! Model A and VW owners! These space-saver Mini- Gator-Jaw rotary latches are great for even the most confined spot. Latch body measures 2.50″ x 1.13″ x 0.53″ with threaded holes and installs with 1/4-20 fasteners, not included. Full 750 pound load rating. Also great for hoods, deck lids and panels. Now with “L” shaped release lever. Striker pins (5/16-18 thread) and washers included.
SKU: L24E -
Wire Routing for Hot Rods
Nylon and Billet Door Wire Looms (TP-NYLON-1/2)
The look of Billet & Black, the door looms are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. 1 One fixed and one sliding aluminum boss. Plastic lined. 1 Mount into 3/4″ and 5/8″ Diameter holes with set screw secured “quick” collars.
SKU: TP-NYLON-1/2
