Shop
Showing 241–260 of 349 results
-
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Sequencing LED Taillights for cars with Separate Turn Signals (L72-SEQ)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSequencing LED Taillights for cars with Separate Turn Signals (L72-SEQ)
These taillights are split 30-10-10-10 so that the inner 30 LEDs are the brake light and taillight and the outer 30 sequence 10-10-10 with the turn signals so they work on cars that originally had separate turn signals.
Flush mounting, build-in lenses are 1/2″ wide X 15-1/4″ long. With hardware, electronic flasher and instructions.
SKU: L72-SEQ -
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
HotSlot Bright White LED Backup Lights (L63BW-5)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior LightingHotSlot Bright White LED Backup Lights (L63BW-5)
Super bright LED strip gives you all the backup light you need. The lights are mounted inย aluminumย buckets. The flush mount clear acrylic lens are 1/2″ wide by 1-3/4″ long. Mounting hardware is included.
NOTE: These lights are not intended as daytime running lights.
SKU: L63BW-5 -
Hot Rod Exterior Lighting
Hot Slot Auxilary LED Tail Light & Turn Signal Kit
Your choice of Amber or Red LED’s.
Our kit features (2) – 4 Super Bright LED units with diffuser lenses that mount inside aluminum housings, included. 1/2″ thick build-in, flush mounted clear acrylic lenses to fit into slightly curved fenders for a seamless look. (The acrylic lenses can not be bent. The acrylic is body worked to be flush with the fender surface.) The lenses are only 1/2″ wide by 1-3/4″ long! Kit includes dual intensity convertors to give park lights and turn signals. Need only 1″ of clearance space behind the mounting surface. Weld-in or glass-in studs for mounting are included. Quality instructions. Really cool stuff!
SKU: L63# -
Custom Automotive Interior Trim Accessories
Oval Brake & Clutch Trim (B02)
Use on cars with elongated pedal shafts. Also great for use on the firewall with accelerator cable and kick down and for some TPI applications. Choose from a solid machined part or our Split ‘n’ Pinned trim. Both are 2-1/4″ diameter with a 5/8″ x 1-1/8″ hole and stainless steel screws and rubber gasket.
SKU: B02 -
Custom Automotive Interior Trim Accessories
Oval Hole/Oval Body Brake & Clutch Trim (B02OVS)
Great new Oval shaped body. For elongated or rectangular pedal shafts Also trim the firewall for accelerator cable and kick down or for some TPI applications. 1-5/8″ X 2-1/4″ wide. 5/8″ x 1-1/8″ hole. Stainless steel screws, Rubber gasket, Split ‘n’ Pinned trim. (Oval Split ‘n’ Pinned) For a solid Oval trim, see our #B14OV-PLT
SKU: B02OVS -
Releases
Round Trim Neat Nob latch release kits (B14)
Neat Nobs are machined aluminum inside door release kits for Gator-Jaw style latchesย and come in several nob styles. ย They can mount directly to the latch or anywhere on your ย door panel using our remote instal kit (sold seperatly).ย This grouping is for the round trim plate. Other trim plates are available. 5 styles of nobs are avilable.ย “Smooth” nobs shown on the left are 1″ long by 1/2″ diameter with a roundedย end. “Turned” nobs (center) are 1-1/8″ long and match the popular column dress-up kit nobs. “Ball nobs (Right) are 1″ dia. Bullet and Chess nobs are not shown in this picture. The round trim plate is 2-1/4” Dia. Stainless Screws
SKU: B14 -
-
Hot Rod Indicators, Relays & Flashers, Hot Rod Wiring Products
LED Mechanical Flasher (WI-02)
We have found a less expensive alternative to our current solid state flasher. ย This flasher functions within the same amperage and life expectations of our solid state version. ย An added benefit to the mechanical flasher is that it makes the “clicking” sound we are all accustomed to when our turn signals are on. ย ย This flasher works from as little as 20ma up to 25 amps max. load. ย This is a round 2 prong flasher that is a direct fit to your current panel. ย These relays have an additional wire coming out of the top where they must be grounded. ย Round, 1 3/8″ dia. ย X 1 3/8″ tall.
SKU: WI-02 -
Custom Automotive Interior Trim Accessories
Power Port with Billet Plug #B23
Accepts any 10-32 threaded knob to match your interior. Photos with knobs are shown for example only. Knobs are priced separately. With all of the modern electronic devices that you need to charge, what’s missing from the average street rod??? A Power Port, of course! And StreetWorks gives you one that is not only attractive but also can be made to match the rest of your interior. Our Power Port with Billet Plug features an easily installed Power Port (fits into a 7/8″ diameter hole), wiring terminals, an attractive, machined Billet Plug with O-ring retainer, a spare o-ring and a 10-32 threaded stud for attaching the decorative knob of your choice (sold separately).
SKU: B23 -
Hood and Trunk Hinges
Power Trunk Lift Kit 100# Actuator (CA-PTL100)
Carolina Custom’s Power Trunk Lift Kits
Power Trunk Lift Kit 100# Actuator
Uses an industrial linear actuators for power – not just a window regulator. Works through a single pivot hole so there’s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk.
SKU: CA-PTL100 -
Hood and Trunk Hinges
Power Trunk Lift Kit 200# Actuator (CA-PTL200)
Carolina Custom’s Power Trunk Lift Kits
Power Trunk Lift Kit 200# Actuator
Uses an industrial linear actuators for power – not just a window regulator. Works through a single pivot hole so there’s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk.
SKU: CA-PTL200 -
Automotive Battery Disconnect Switches & Kits
PressTech Touch Pad Battery Disconnect (L27P)
“Touch ON, Touch OFF” to disconnect your battery with our PressTech Touch Pad Battery Disconnect kit. Hide the waterproof touch pad for maximum security – put it under the lip of your dash, behind upholstery, inside a fender well, etc. Great as an anti-theft deterrent or to prevent battery drain. Includes our auxiliary ย “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is NO electricity used when this unit is “on”, only when switching between on and off.
SKU: L27P -
Custom Switches for Hot Rods
PressTech Touch Pad Switch (L32PS)
A brand new way to activate door solenoids or actuators. This small, 1″ x 1″ x 1/8″ thick pad switch can be hidden in the neatest places. Put it under upholstery, inside a fender lip or mirror housing, almost anywhere and activate it with a simple press. Fully waterproof pad switch comes with quality 3M tape for mounting.
Please Note: If using solenoids or for loads over 2 amps, see our relay section part #L07-40.
Remember – Keylock security can be used with any Entry Triggering Systems.
SKU: L32PS -
Automotive Switches and Buttons
Push Button LED Switch Panel
Please call us with your needs and we will make your custom switch panel for you.ย Virtually any configuration imaginable within our panel sizesย are possible from momentary to standard toggle.
These switches can not currently be purchased online at this time due to there being way too many options available.ย Push Button Panels with LED’s.ย Dimensions are the same as Push Button Panels.ย Your choice of Red, Green, Blue or Amber LED’s.ย We can also do manual and self-canceling turn signal kits with or without LED’s for turn and/or high beam indicators.
Give us a call today!
866-859-0513
SKU: L10R-Panels -
Automotive Switches and Buttons
Waterproof Button Switch (L65BS)
High quality waterproof button for activating solenoids or actuators. Don’t use unsealed switches! The buttons are 5/8″ dia. x 1/4″ tall and mount in a 1/2″ hole, momentary action. 5 amps rating.
Please Note: If using solenoids or for loads over 5 amps, see our relay Part #L07-40.
SKU: L65BS -
-
Hot Rod Wire Harness Kits and Parts
Core+ Rebel Wire 9 3 Wire Harness
This harness has 12 Fuses and 14 Circuits. Its perfect for your Hot Rod, Street Rod, Custom or Muscle Cars and Trucks that require fewer circuits.ย
Assembled in the USA from American made components, the heavy duty SXL wire is labeled every 6″ and bundled for easy installation.
This kit has 11 circuits for lights, gauges, radio, radio constant-cell phone charger, wiper, ac-heat, motor, and third brake light, plus 3 open circuits for whatever you might want to add such as power windows and doors, etc.
Kit comes with easy to use instructions for Chevy, Ford or Mopar installations, dash light wire, neutral safety switch wire, fusible link, 1 1/4″ rubber grommet for the firewall, 3 fuse block terminals and fuse block label.KIT INCLUDES BASIC AUTO ELECTRICITY BOOK
SKU: WI-CORE -
Hot Rod Wire Harness Kits and Parts
Rebel Wire Universal 16 Circuit Wiring Harness
16 Circuit wiring harness designed for Chevy, Ford, Mopar and other 60โs and 70โs cars and trucks. Kit has the following circuits: Horn relay, Headlights 2 or 4, Hazard, Cell phone charger, Dome and Trunk Lights, Radio and Radio Constant, Gauge Power, Wiper, Brake Light,3rd Brake Light, AC-Heat. Turn Signal, Elec. Choke and 1 Accessory wire, Fusible Link and Rubber Grommett.
All our kits are manufactured using heavy duty SXL wire and labeled every 6″. All kits come with easy to follow instructions and Tech Line info.KIT INCLUDES BASIC AUTO ELECTRICITY BOOK
SKU: WI-S16
