Shop
Showing 281–300 of 349 results
-
Hot Rod Exterior Lighting
Double-D LED Third Brake Light Red or Clear Lens (L58BT-DD)
Double-D taillights with twice the diodes.ย Two strips of 60 super bright red LED’s per light, inside an aluminum housing.ย 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers.ย Large Double-D 3rd Brake Light split (30/60/30).ย Works with integral turn/brake systems or vehicles with separate turn signals.ย The lenses are 1/2″ wide by 15 – 1/4″ long.ย Hardware Included.
SKU: L58BT-DD -
Hot Rod Exterior Lighting
Flush Mount Third Brake Light with Amber Turn Signals (L58BTACL)
This is the maximum in safety providing optimal visibility for both braking and turn signals!
Red LED 3rd Brake Light with Amber LED Turn Signals 35 Bright Red LED’s are a dedicated center 3rd Brake Light. 8 Super Bright Amber LED’s provide Turn Signals at each end. This light works on vehicles with integral or separate turn signal/brake bulbs. Clear Lens with diffuser.
SKU: L58BTACL -
Hot Rod Exterior Lighting
Flush Mount Red LED Third Brake Light with Turn Signals
Like our full size Hole Slot lights except with 30 Super Bright Red LED’s. A single intensity light but split 10-10-10 so that your turn signals will also be displayed. (Can also be wired as one solid 30 LED unit.) Red lens is1/2″ wide by 7-1/2″ long.
SKU: L58SMBT -
Hot Rod Exterior Lighting
Flush Mount Sequencing 60 LED 3rd Brake Light (L58B-SEQ)
Get their attention with our Sequencing 60 LED 3rd Brake Light. It’s split 10-10-20-10-10 and sequences inside-out once when the brakes are first applied then stays on solid. Flush mounting, build-in lens is 1/2″ wide X 15-1/4″ long.
SKU: L58B-SEQ -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
One-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsOne-Piece Flush Mount Hot Slot LED Taillight Kit (L68)
THIS PRODUCT IS DISCONTINUED> We’ve put 120 super bright red LED’s into a single, one-piece taillight kit – single slot red lens measures 30-3/4″ long X 1/2″ wide to provide an uninterrupted, smooth look. Diffuser attached. Will work in surfaces with gradual curvature up to about 2-1/2″. The LED’s are dual intensity for taillights and brake/turn signals and are premounted into an aluminum housing. We also provide an aluminum “spacer box” to fill the gap created by body curvature and to seal out dirt and water – simply cut to the contour of the body. Weld-in or glass-in studs for mounting are included. Note that this is a build-in kit requiring extensive paint and body working skills.
SKU: L68 -
Hot Rod Exterior Lighting
Brakelighter 12 Volt 3rd Brake Light (65515)
Now you can feel safe knowing the cars behind you will see your brake lights. This slick little unit attaches to the inside of your rear window. For easy removal when youโre at aย judged show attach the light with the included suction cups. For a more permanent installation double sided tape is also included.ย The light is divided into 3 sections, letting you use it for turn signals as well as brake lights. Works with either positive or negative ground vehicles. Instructions included. This light is 12 โ long , 5/8โ tall & 7/8โ deep.
SKU: 65515 -
Hot Rod Exterior Lighting
Brakelighter 6 Volt LED 3rd Brake light
Looking for more LIGHT in the rear of you 6V vehicle? We now have a Led 3rd brake light that will wire into you 6v system. The light meassures 12″ long, 5/8″ high and 7/8″ deep. Mount the light on to your back window using either the 2 way tape system or a temporary install with the suction cup system so you can take it down when you get to that classis car show. There are multiple wiring diagramsย to follow depending on if you what your turn signals to be wiried into the light or not. This light comes with everything you need to complete the install fast and easy.
Note: If your rear window is at an angle and the light will point more up than back ask about theย swivel mounting system!
SKU: 65504 -
Hot Rod Exterior Lighting
Brakelighter Clip Package
Optional mounting clip package.ย ย If your rear window is slanted, curved or split glass you may want to order the optional mounting clip pack. It includes brackets and the necessary hardware to adjust the light to the perfect viewing angle.
SKU: 65526 -
-
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Retro Round Micro 3rd Brake Light (EL-MBRX)
The Retro Roundย Micro 3rd Brake Light is designed to get a driverโs attention, yet at only 2ยฝโ by ยฝโ by 1 3/8′ it goes nearly un-noticed on the car. Tiny yes, but we’re using powerful CREE style LEDs to put out tons of bright red light.ย Surface mount or flush mount versions are available.
SKU: EL-MBR -
Hot Rod Exterior Lighting
Billet Pedestal Third Brake Light with Turn Signals (L61)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 60 super bright red LED’s are split into 3 groups of 15-30-15 so that you have a 30 LED center 3rd brake light and (2)-15 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
SKU: L61 -
Hot Rod Exterior Lighting
Billet Third Brake Light, Clear Lens! L61C
The BEST pedestal 3rd Brake Lights.ย Clear lens – 15% brighter!ย 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base.ย 60 super bright red LED’s.ย 3 groups of 15-30-15 provide a 30 LED center 3rd brake light and (2) – 15 LED turn signal/brake lights.ย Or add our LED conversion kits to get taillight and turn/brake or wire them all as one big and bright 3rd brake light.ย (L61C)
Now also with Amber Turn Signals!
Now get this light with the center 35 red LED’s as a dedicated brake light and each end with 8 super bright amber LED turn signals – really bright and super visible to make your ride safer than ever.ย (L61CA)
SKU: L61C -
Hot Rod Exterior Lighting
Billet Third Brake Light with Amber Turn Signals
The BEST pedestal 3rd Brake Lights.ย Clear lens – 15% brighter!ย 16-5/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base.ย 60 super bright red LED’s. ย Now get this light with the center 30ย red LED’s as a dedicated brake light and each end with 15ย super bright amber LED turn signals – really bright and super visible to make your ride safer than ever.ย (L61CA)
SKU: L61CA -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall Billet Pedestal Third Brake Light with Turn Signals (Red Lens)(L61SM)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30ย super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
SKU: L61SM -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Billet Third brake light, Clear Lens (L61SMC)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsSmall Billet Third brake light, Clear Lens (L61SMC)
We’ve taken Pedestal 3rd Brake Lights to a new level! This gorgeous piece is 8-7/8″ wide, 3/4″ high (body), 1-1/8″ deep and only 2″ tall including the swivel base. 30ย super bright red LED’s are split into 3 groups of 10-10-10 so that you have a 10 LED center 3rd brake light and (2)-10 LED turn signal/ brake lights. You could also add our LED Conversion Kits to get taillight and turn/brake or wire then all as one big and bright 3rd brake light.
Our Small Billet Pedestal 3rd Brake Light is also 15% brighter and still with built-in turn signals. 30 super bright red LEDโs behind a clear lens with diffuser. (L61SMC)
OR
Clear lens light with 15 center red LED’s and 4 bright amber LED’s at each end. (L61SMCA)
SKU: L61SMC -
Hot Rod Exterior Lighting
L61 Third Brake Light Billet Pedestal Extension (EL-61E)
Extends the mounting base on any of the Billet Pedestal lights, above by 2-7/8″ allowing them to be adjustable in height and position. Fit split window rods or vehicles with glass curvature where the light can not be mounted directly at the glass edge.
SKU: EL-61E -
Hot Rod Power Window Switches
Power Window Lift Kit by Specialty Power Windows (PW-L2P)
This universal, flat glass kit including OEM motors, rugged risers, motor plug and leads, bottom window channels and mounting material, support brackets, and instructions. 8-1/2″ clearance is needed below the bottom of the glass. Riser can be shortened for your application. Lifetime Warranty from Specialty Power Windows. 2-doors. Works with any of StreetWorks Power Window Switch Kits.
Why buy a kit with plastic switches that you don’t want – pay more and have to throw them away?!?! Get this kit and add the switches that you want. This kit works with all flat glass applications.ย If your ride has curved glass just get in touch, we’ll contact Specialty Power windows and get just what you need.
SKU: PW-L2P -
Releases
Interior Neat Nob Interior Door Release Switches
Your interior never had it so good. Clean and Elegant design to match the look of billet power window switch plates or to add stand-alone beauty to your doors. And the best part is still how great they work. 1-3/4″ square trim plates. Smooth, Turned or Ball Nobs. Stainless Screws.
SKU: B14Q -
Wire Routing for Hot Rods
Stainless Steel Braided Door Wire Looms (TP-SSDWL-1/2)
The added looks of stainless braid, the door jams are 1/2″ O.D. x 3/8″ I.D. x 7+” effective length. One fixed and one sliding threaded aluminum boss. Plastic lined. Mount into 3/4″ Diameter holes with jam nuts included.
The sliding collars may be trimmed shorter when going through less material.
SKU: TP-SSDWL-1/2
