Shop
Showing 301–320 of 349 results
-
Wire Routing for Hot Rods
Stainless Steel Braided Door Wire Looms for Suicide Doors (TP-SUICIDE)
These wire looms can open to more than 200 degrees and not bind! Swivel ball bushings assure smooth operation. 1 1/2″ O.D. X 3/8″ I.D. X 7+” length, plastic lined S/S Braid. New Quick Collar ends. Ball swivel flange end mounts vertically and is just 2″ high.
SKU: TP-SUICIDE -
Wire Routing for Hot Rods
Mag Daddy Magnetic Fasteners (625**)
Mag Daddy utilizes Ultra-Strong magnets the same that are used in Aerospace, and Automotive Industries. These magnets for the first time ever are being used for applications in Wire/Cable management, and automotive fastener solutions. Mag Daddy magnets easily stick through oil, grease, paint, and dirt. After placing a Mag Daddy Fastener onto a thick piece of steel, i.e. I-Beam, it appears as if it was welded on!
Mag Daddy magnetic fasteners are quickly gaining acceptance throughout the globe, Mag Daddy products are used in all types of ways from holding down wires and door panels, to holding up signs and coats, as well Mag Daddy products continue to find themselves inside various OEM products.
Mag-Daddy Fasteners are a MUST!!
SKU: 625** -
Hot Rod Wiring Products
Bracket for Power Jumper Studs (SA-5000)
From our friends at Sachse Rod Shop. Galvanized 1/8″ steel plate, 5″ long with Jumper Stud holes and mounting holes and screws. Makes installation a no-brainer! Bracket is pictured on the left. Shown on the right is the bracket in a typical instalation with Studs which are sold seperately
SKU: SA-5000 -
-
Automotive Door Latches & Parts
Stainless Steel Striker Bolts for Medium Gator-Jaws
Rust free good looks. 1/2″ Dia. X 3/4″ shank stainless steel shoulder bolt with 3/8-16 x 7/8 long thread. Head is 3/4″ Dia. X 5/16 high. Sold in Pairs. Fits the dearborn Deuce. For cars with a larger door-to-jam gap.
SKU: S24B-7/8 -
Automotive Door Latches & Parts
Gator-Jaw Door Prop Rod (CA-DRP4)
Carolina Custom’s “Slick Rod” for holding doors open at shows. Secure attachment to your Gator-Jaw style latch – one end fits over the striker bolt, the other end “locks” into the latch. Fits any of the three popular sizes of Gator-Jaw latches. The rod itself is stainless steel.
SKU: CA-DRP4 (pair) -
Hot Rod Interior Column Trim
Steering Column Trim / Lightning Roll Cage Pass Through (B03N)
Give your steering column the finished look with our machined aluminum trim with heavy duty rubber seal. Made with StreetWorks unique Split ‘n’ Pinned design for easy installation – no column removal required. The ring measures 3.420″ I.D. and 4.800″ O.D. and includes stainless steel mounting screws. The rubber seal has an opening to fit GM and other columns measuring 1-3/4″ to approximately 2-1/8″ diameter. Some trimming may be required for larger diameters. Now with an additional grommet to fit 1-1/2″ diameter columns.
These trim rings also double as a pretty sweet finishing piece for your Ford Lightning roll cage pass through. Â Of course these will work for virtually any other roll cage pass through you can think of but they are commonly used in the Lightning application.
SKU: B03N -
-
Custom Switches for Hot Rods
The Best Brake Switch (L08)
We call it that because our customers say it’s the best. This adjustable, mechanical switch helps you by getting rid of those undependable hydraulic pressure switches that burn out every year (or more often!). This switch will last because it uses self-cleaning contacts to prevent the carbon build-up that destroys hydraulic switches. Its adjustable design allows it to fit most pre-1960 vehicles, customs and many other later models with through-the-floor brake pedals, no additional brackets needed. And it’s waterproof. Stainless hardware, connectors and instructions included.
SKU: L08 -
Custom Switches for Hot Rods
700R4 Lock-up Kit
700R4 Brake Switch/lock-up Got a 700R4 transmission? Got a light car and lots of power? Want to have that 700R4 convertor locked up at all times except when the brake switch is on? Here you go. Our Best Brake Switch with a SPDT relay -when the brakes are off the convertor is locked up, and when they’re on, it’s not. Just that simple and easy to install.
SKU: L08-700R4 -
Releases
Thin Oval Neat Nob Door Latch Release Kit
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOS (with Smooth Nobs on left in photo)
SKU: B14NOS -
Releases
Thin Oval Neat Nob Latch Release Kits
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOTÂ (with Turned Nobs in center in photo)
SKU: B14NOT -
Releases
Thin Oval Neat Nob Latch Release Kits
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOB (with Ball Nobs on right in photo)
SKU: B14NOB -
Custom Hot Rod Window Cranks, Releases
Neat Lever Latch Release Kit (B19)
How about a Lever latch Release? We’ve got that, too! This 2-door kit has the billet levers (1-5/8″ L x 3/4″ W x 5/8″ H), cable, connectors, bell-crank, studs and hardware for mounting and attachment to your gator-jaw style latch.
SKU: B19 -
Releases
Installation Kit for Neat Nobs
Allows you to install StreetWorks Neat Nobs away from the latch and door jam, forward on the door where the original inside handle was. A “T” lever and cable are used to attach to the latch. Once installed, a simple push on the nob actuates the latch. Our kit works in either steel or fiberglass cars and has all of the hardware you need to connect a Neat Nob kit to gator-jaw style latches. Detailed drawing and written instructions included.
SKU: B14R
