Shop
Showing 101–120 of 349 results
-
-
Car Interior LED Lights
Glove Box/Trunk tilt Switch Kit (L03)
Turns on lights in your glove box, trunk or under yourย hood. Kit includes the switch, mounting screw, and a bright warm white LED strip. The tilt switch has a clear plastic housing to check its operation. The LED strip has adhesive tape for easy and strong mounting.
SKU: L03 -
Car Interior LED Lights
2.5″ Illuminated Drop In disc for Cup Holders (Pair) (IL-10#)
2.5″ Illuminated Drop In disc for Cup Holders.
Drop in illuminated LED inserts for StreetWorks Small Stainless Steel Cup Holders. Light up your current StreetWorks Cup Holders with your choice of colors (Amber, Blue, Green, Red or White available). Simply drill a 1/4″ hole in your existing cup holder and insert the new illuminated disc.
NOTE: Cup Holders Sold Separately
These discs fit our small 43010 stainless cup holders.
SKU: IL-10# -
Hot Rod Cup Holders
Swing Out Cup holder (#43053)
Add a useable hidden cupholder to your hot rod for those thirsty cruise days.ย The cupholder has the perfect size opening to harness the largest of quickie mart drinks yet still handles your typical water bottle just fine.ย This billet aluminum swing out design swivels under the dash or even your seat for that tidy hidden look.ย The cupholder has a moveable latching under support so it is very compact when put away.ย Stop limiting yourself on what you drink in your car because it doesn’t have a locking lid and add a cupholder today.
SKU: 43053 -
Hot Rod Cup Holders
Swing Out Cupholder Extension (IT-53E)
Does our swing out cupholder not come out far enough from your dash? ย Here’s the solution a nice Brushed Aluminum Extension that will get that cupholder out far enough for you to rest your drink in. ย This extension is adjustable with 3 different lengths for your adjustment.
SKU: IT-53E -
Hot Rod Cup Holders
Billet Power Swing Out Cupholder (IT-PSO)
We have taken our unbelievably popular 43053 Billet Swing Out Cup Holder and turned it into a Power Swing Out Cup Holder.
Hold the momentary switch until the cup holder reaches full extension.ย Hold the momentary switch again and the cup holder retracts back out of sight.
Choose Right hand swing if you need it to pivot out from under the dash from right to left.
Choose Left hand swing if you need it to pivot out from under the dash from left to right.
The kit comes with a fully assembled “unit” that is easily mounted under a dash or seat, a prewired switch, mounting screws and instructions.
SKU: IT-PSO -
Hot Rod Cup Holders
Pop Out Dual Cup Holder with Black Plastic Face (43064)
The guts of this slick German engineered unit come directly from the factory. ย Mount our included bracket behind your dash and just slide this baby in. ย Also can be mounted under the dash, built into a bench seat or a center console. ย You will need a spot that’s 7 3/4″ wide, 1 1/4″ tall and 5 1/4″ deep.
SKU: 43064 -
Hot Rod Cup Holders
Flush Mount Pop-out Dual Drink Holder (43043)
The guts of this slick German engineered unit come directly from the factory.ย We’ve imported them and designed a billet faceplate.ย Mount our included bracket behind your dash and just slide this baby in.ย Also can be mounted under the dash built into a bench seat or center console.ย You will need a spot that’s 7 3/4″ wide and 1 1/4″ tall. It is 5 1/4″ deep.
SKU: 43043 -
Hot Rod Cup Holders
Small Stainless Steel cup holder (pair)(43010)
These stainless steel drop in cup holders are the perfect size for tight spaces. They fit a soft drink can like a glove. Most medium sized fast food drinks will fit as well as a coffee cup. We have the bottoms lined with cork for a clean distintive look (and loose change won’t rattle) 2″ deep and 2 9/16″ ID. Sold in pairs
SKU: 43010 -
Hot Rod Cup Holders
Large Stainless Steel drop in cup holders, (Pair) (43021)
If you like a cold jumbo drink while you cruz or perhaps you go for a mega-grande from 4-Bucks Coffee these are the cup holders for you. At 3.5″ dia.and 2″ deep they’ll hold about anything. We cork lined the bottom for you to quiet down things and add a bit of style. Sold in pairs.
SKU: 43021 -
Hot Rod Cup Holders
Medium Natural Aluminum Cup Holders (pair) (IT-MAC)
With large and small cup holders in Stainless Steel we thought some of you might prefer medium as well.ย These aluminum units are 3.25 dia. by 3″ย deep with a 4โ flange. These are finished with a cork base and are sold in pairs.
SKU: IT-MAC -
Hot Rod Cup Holders
Medium Black Aluminum cup holders (Pair) (43032)
With large and small cup holders in Stainless Steel we thought some of you might prefer black trim to match your interior. These black anodized units are 3.25 dia. by 3″ย deep with a 4โ flange. They are finised with a cork base and are sold in pairs.
SKU: 43032 -
Custom Automotive Interior Trim Accessories, Hot Rod Cup Holders
Billet Drink Holder with magnetic base (B-DH)
Custom Automotive Interior Trim Accessories, Hot Rod Cup HoldersBillet Drink Holder with magnetic base (B-DH)
What do you do??? You’re at the Burger-Doodle drive-thru window, get your double-burger, large fries and drink – the burger and fries kinda’ stay in the bag, but the drink has got to go between your legs. So now you’re steering with your left hand, your right hand is bouncing between the stick shift, french fries and burger, left leg clutch, right leg brake… and that drink is r-e-a-l-l-y cold. Get our beautiful, Billet Drink Holder! Magnetic base holds tight on the glove box door, yet removes easily to store in the glove box. 3″ I.D. x 2-1/8″ deep holds most drink cups. Inner plastic cup to catch condensation. Dual-black O-rings for added looks.
SKU: B-DH -
Car Interior LED Lights
3 1/4″ Drop in Illuminated Disc for Cup Holders (Pair) (IL-21#)
We have decided to sell these illuminated discs as an add on for your existing cup holders.ย All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. ย It’s a simple 2 wire installation consisting of power and ground. ย You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separatelyย
These drop in discs fit the large 43021 stainless cup holders.
SKU: IL-21# -
Hot Rod Cup Holders
Illuminated Stainless Steel Small Cup Holders (43010#)
These are our small stainless steel drop-in illuminated LED cup holders. These cup holders measure 2 – 9/16″ ID by 2″ deep with a 3โ flange.ย These are available in your choice of Amber, Blue, Green, Red or White.
SKU: 43010# -
Car Interior LED Lights
Pair of 3 1/4โณ Drop in Illuminated Disc for IT-MAC Cup Holders (IL-MAC#)
We have decided to sell these illuminated discs as an add on for your existing cup holders.ย All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through.ย It’s a simple 2 wire installation consisting of power and ground.ย You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separately
SKU: IL-MAC# -
Hot Rod Cup Holders
Illuminated Stainless Steel Large Cup Holders (43021#)
These are our large stainless steel drop-in illuminated LED cup holders. These cup holders measure 4.25″ dia.ย by 2″ deep with a 4โ flange. ย These are available in your choice of Amber, Blue, Green, Red or White.
SKU: 43021# -
Car Interior LED Lights
3 1/8″ Illuminated Drop in Disc for Cup Holders (Pair) (IL-32#)
Here is the same illumination offered in all of our drop in cupholders. ย We have decided to sell these as an add on for your existing cup holders, ย All you have to do is drill a 1/4″ hole in the bottom of your existing cup holder and pass the wires through. ย It’s a simple 2 wire installation consisting of power and ground. ย You can switch it on with your headlights or an aux. switch.
NOTE: Cup Holders Sold Separatelyย
These drop in discs fit our black medium 43032 and natural aluminum IT-MAC cup holders.
SKU: IL-32# -
Car Interior LED Lights, LED Dash Indicator Lights
LED Indicator Lights (L18)
These “press in” LED indicator lights are small and easy to install. If your looking for a simple LED indicator that is not over powering to your dash then this is what you are looking for. There are 2 sizes available 5/32″ (0.156″) or 1/4″ (0250″) mounting hole.
SKU: L18
