Shop
Showing 141–160 of 349 results
-
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
7-1/2″ White Running Light with Amber Turn Signal (L58SM-WACL)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting7-1/2″ White Running Light with Amber Turn Signal (L58SM-WACL)
State of the art Flush Mount styling for the front of your ride. Each light contains aย cluster of Bright White LED’s –ย for running or backup lights AND (12) Super Bright Amber LED’s for Turn Signals. Flush Mount Clear Lenses are 1/2″ wide x 7-1/2″ long x 1/4″ thick with diffuser. Mounting hardware included.
SKU: L58SM-WACL -
Hot Rod Indicators, Relays & Flashers
80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Hot Rod Indicators, Relays & Flashers80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Do you realize that the best ignition switches are rated for 30 amps and some for only 15 amps??? And how many amps of accessories are you using? This relay can give a full 80 amps of accessory power and take the load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches), 10 gauge wire feeds and connectors. Terrific instructions. Also great as a headlight switch relief relay or for any application that you need 80 amps of switching power.
SKU: L07-80 -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Sequential LED Taillights (L58-SEQ)
A real attention getter! Our L58 taillights, but three steps better. Each light is split into three groups of 20 LED’s that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on. All the necessary convertors and sequencing modules are included along with great instructions. Includes electronic flasher for flasher operations.
SKU: L58-SEQ -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Sequential LED Taillights (L58SM-SEQ)
Our #L58SM taillights above, but three steps better. Each light is split into three groups of 10 LED’s that sequence inside-out with the turn signals. Brake lights quickly sequences once then all stay on. All the necessary convertors, an electronic flasher and sequencing modules are included, with great instructions.
SKU: L58SM-SEQ -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Flush Mount LED Taillight with Red Taillight/Brake and Sequential Amber Turn Signals (L58RACL-SEQ)
Hot Rod Exterior Lighting, Hot Rod LED Brake LightsFlush Mount LED Taillight with Red Taillight/Brake and Sequential Amber Turn Signals (L58RACL-SEQ)
This great LED taillight has 40 bright red LEDโs in each light that are dual intensity for both taillights and brake lights plus 12 super bright amber LEDโs that will sequence 4-4-4 for the turn signals. Clear build-in lenses with diffusers are 15-1/4โ long X 1/2โ wide, sequencing modules, LED flasher and mounting hardware.
SKU: L58RACL-SEQ -
Custom Switches for Hot Rods
Tilt Lever Switch (L33)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. 1/4-28 threads work for GM & other applications.
This beautiful Tilt Lever contains a REAL ON/OFF switch, not just a grounding contact, to give you true switching capability. Add a 40 amp relay and use it to switch nearly anything!
And let’s not forget HI/LO Beam dimming. Our unit comes with a quality, long lasting 40 amp SPDT automotive grade relay and we stand behind this product 100% with our Satisfaction Driven Guarantee. Also works for any ON/ON circuit.
SKU: L33 -
Hot Rod Wiring Products
85 Amp Diode (L-85A-DIODE)
Here’s a real problem solver – from StreetWorks, of course. An 85 amp diode to prevent back streaming in a high-amperage circuit such as a radiator fan, tuner amplifier or any other circuit that you want to be fully isolated. Comes with 10 ga wire leads and butt connectors for easy in-line installation. Only 2/10ths of a volt drop across the diode to allow maximum forward voltage….. What a great idea!
SKU: L-85A-DIODE -
-
Hot Rod & Automotive Interior Display Trim
Backup mirror/camera system with License plate camera (IT-MIR-LP)
Hot Rod & Automotive Interior Display TrimBackup mirror/camera system with License plate camera (IT-MIR-LP)
A Watsons StreetWorks exclusive! Weโve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you.ย Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment.ย The mirror measures 3″ by 6″ overall and the base is 2-ยฝ” by ยพ”.ย The arm is 2-ยฝ” long. The screen has several adjustments including contrast, brightness, etc.ย Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
The license plate camera mounts behind your plate with just the tiny camera sticking over. Run the wire through a small, 7/32″ hole.
SKU: IT-MIR-LP -
Hot Rod & Automotive Interior Display Trim
Backup mirror/camera system with through hole camera (IT-MIR-TH)
Hot Rod & Automotive Interior Display TrimBackup mirror/camera system with through hole camera (IT-MIR-TH)
A Watsons StreetWorks exclusive! Weโve placed a 4.3 inch screen in a custom billet center mirror that will look great in any ride. We offer 2 styles of cameras to make the installation easy. Wiring the system is amazingly easy, just supply power and ground to the camera and screen, then one wire joins the 2. When you put your vehicle in reverse the solid state screen comes on instantly. The smoked glass on the mirror looks great when the screen is off and cuts the nighttime glare from lights behind you.ย Mount the mirror on your dash or overhead. The arm pivots at both ends giving you plenty of adjustment.ย The mirror measures 3″ by 6″ overall and the base is 2-ยฝ” by ยพ”.ย The arm is 2-ยฝ” long. The screen has several adjustments including contrast, brightness, etc.ย Choose from either a license plate mounted camera or a body mounted unit. Both packages include the billet framed mirror/screen with mounting hardware, a waterproof camera, wire and instructions.
To mount the through hole camera simply drill a ยพ” hole on a level body panel.
SKU: IT-MIR-TH -
Specialty Flashers & Relays
Power Cowl Vent Kit (L34)
Give your cowl vent a lift with this powerful gear motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. Steel bracket for cowl can be bolted or welded. Attractive 5″ aluminum rod arm gives a clean look. Motor with mounting bracket and lever arm measure 2-1/2″ wide, 4″ high and 3-1/4″ deep including motor, not including 5″ connecting arm. Also works for power glove box door.
The motor is not waterproof.
SKU: L34 -
Automotive Battery Disconnect Switches & Kits
Battery Disconnect For Remote Controls (L27R)
Use that extra remote control channel (just one momentary switch) to shut off the battery from outside the car. Push it once and the battery is connected. Push it again and the battery feed is disconnected. Includes our auxiliary “hot” feed to the clock or computer or other items requiring power for memory. The solenoid is rated 110 amps continuous duty and 750 amps surge. Hardware, wire, connectors and detailed instructions included. There is no electricity used when this unit is ON or OFF, only while switching. Remote not included.
SKU: L27R -
Specialty Flashers & Relays
Turn Signal Module (L-TSMOD)
If you have your own turn signal switches but need brake light override circuitry, get our Turn Signal Module. Full instructions and schematic. (NOTE: The Turn Signal Module is already included in all of our Turn Signal Switch Kits.) Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Turn Signal Module is just 1-1/2″ square X 7/8″ high.
SKU: L-TSMOD -
Hot Rod Wiring Products
Battery Terminal Studs
Jumper Studs:
Extra heavy duty studs. Solid brass contact post is 13/16″ diameter x 1-1/8″ long with marked, colored cover (red for +, black for -) Terminal stud is 3/8-16. Insulator requires a 1-1/4″ hole to install. ย If you need to replace a single post just drop us a line
Jumper Bracket:
From our friends at Sachse Rod Shop. Galvanized 1/8″ steel plate, 5″ long with Jumper Stud holes and mounting holes and screws. Makes installation a no-brainer!ย
SKU: WI-BJS -
Hot Rod Wiring Products
Battery Power Jumper Studs (31032)
Extra heavy duty studs. Solid brass contact post is 13/16″ diameter x 1-1/8″ long with marked, colored cover (red for +, black for -) Terminal stud is 3/8-16. Insulator requires a 1-1/4″ hole to install. Now sold in Sets only here. If you need to replace a single post just drop us a line
SKU: 31032 -
-
-
Wire Routing for Hot Rods
Billet Wire Port (B16)
Here is a great way to dress up the area of the firewall where the wiring harness goes through. The Wire Port main body is 2″ dia. with a 1-1/2″ inside dia. and is secured to the firewall around the wire bundle hole with four (4) truss head screws. A 1″ x 13/16″ deep cut-out in the Wire Port body allows the wire bundle to exit close to the firewall (a rubber grommet is included for smaller wire bundles). The body is then capped off with an attractive machined cover which has three (3) ball-milled grooves. The design allows for the wire bundle to be installed before the final attachment of the Wire Port is done. Attractive, functional and at a very reasonable price.
SKU: B16 -
Wire Routing for Hot Rods
Billet Wire Pass-through (B21)
A really attractive way to dress up the area where the wires come through the firewall. Unit measures 1-1/2″ wide X 2″ tall X 1″ deep with a wire exit size of 1″ wide X 3/4″ deep. Blind fastens from behind for that smooth look. Hardware and template included.
SKU: B21