Door Latches
Locking Bear-Claw Latches
and Mounting Plates bearclaw
You've wanted them... and StreetWorks has them. Medium size, single rotor, "trip" latches and strikers meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force - AND THEY'RE LOCKABLE! All of the features of our L24 latches plus the added feature of lockability. Push the lock lever down and the latch is locked, up and it's unlocked. Works with lock actuators and or with interior door lock "buttons" found on many cars. Bring your ride into the 21st Century with the best replacement latch available. SOLD IN PAIRS ONLY.
|
 |
|
#L24LK (Locking Latches & Striker Bolts, Sold in Pairs only) |
$95.00 |
|
#L24B-6 Installation screws - 1/4-20 x 3/4 S/S button socket screws.
|
$3.25 |
Bear-Claw Latches
The standard for replacing old door latches. These "trip" rotory latches meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force. The single rotor latch with "L" shaped release lever assures quick release action from either of two directions (down or horizontal). Latch body measures 3-7/8" x 1-1/4" x 13/16" with threaded holes and installs with 1/4-20 fasteners, not included. |
 |
|
#L24 (Latches & Striker Bolts, Pair) |
$54.95 |
|
#L24S (Latch & Striker Bolt, Single) |
$29.95 |
Installation screws - 1/4-20 x 3/4 S/S button socket screws.
|
#L24B-6 |
$3.25 |
|
#L24B-3 |
$1.65 |
Make your installation job a breeze with these heavy gauge steel, weld-in plates for the above single rotor bear-claw style latches. Get them by themselves or with the latches and striker bolts. S/S installation screws included with the plates. Sold in pairs only.
|
#L24M (Mounting Plates with screws, Pair) |
$35.00 |
Bear Claw Door Prop Rod
Carolina Custom's "Slick Rod" for holding doors open at shows. Secure attachment to your bear claw style latch - one end fits over the striker bolt, the other end "locks" into the latch. Fits any of the three popular sizes of Bear Claw latches. The rod itself is stainless steel.
|
 |
Stainless Steel Striker Bolts for Medium
Size Bear Claws
Rust free good looks.
1/2" Dia. X 3/4" shank stainless steel shoulder bolt with 3/8-16 x 5/8
long thread. Head is 3/4" Dia. X 5/16 high. |
 |
| #S24B (Pair) |
Only...$35.00 |
7/8" Long S/S Striker Bolts
For cars with a larger door-to-jam gap. Fits the Dearborn Deuce.
|
 |
| #S24B-7/8 (Pair at right) |
Only...$40.00 |
Cage Nuts
Provide adjustment for the striker of the medium size striker. Bolt-in. |
 |
|
#L24CNS (Each) |
$9.00 |
|
#L24CN (Pair) |
$17.00 |
Mini-Bear Claw Latches
Hey! Model A and VW owners! These space-saver Mini- Bear Claw rotary latches are great for even the most confined spot. Latch body measures 2.50" x 1.13" x 0.53" with threaded holes and installs with 1/4-20 fasteners, not included. Full 750 pound load rating. Also great for hoods, deck lids and panels. Now with "L" shaped release lever. Striker pins (5/16-18 thread) and washers included. |
 |
|
#L24E (Latches & Striker Pins, Pair) |
$54.95 |
|
#L24ES (Latch & Striker Pin, Single) |
$29.95 |
Installation screws - 1/4-20 x 3/4 S/S button socket screws.
|
#L24B-4 |
$2.20 |
|
#L24B-2 |
$1.15 |
Mini-Latch weld-in mounting plates -Sold in pairs only
|
#L24EM (Plates with screws, Pair) |
$35.00 |
Cable Installation Kit
Why scrounge through hardware stores for the rest of the "kit" that those guys don't sell? This kit puts together all of the little parts to connect actuators or solenoids to latches... for less than 10 bucks! Includes 30" of aircraft cable, a delrin® plastic pulley, wire stay, pulley mounting hardware, cable ends and instructions. Don't waste time and money - get our kit and make your life a little easier. |
 |
Cable Installation Kit for Latch Releases
Get all the pieces to help you connect your latch and latch release. 6+ feet of cable and sheathing (cut to length for 2-doors), 8 sets of plastic clips, screws and nuts.
Compression sleeves (fixed end) and cable adjusters.
|
 |
| #B20C (for 2-doors) |
$20.00 |
|
