Boom Mat Damping Material (DE-BM)
NEW AND IMPROVED! Our new 2mm version of damping material is 33% thicker than our original material.
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and itโs strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in aย variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
- High performance adhesive maintains adhesion throughout temperature extremes
- Eliminates low frequency noise problems
- Non-hazardous material
- Flexible โ can be applied to irregular surfaces
- Easily trimmed to size with Boom Mat Blade Lock Knife
- User friendly peal and stick installation
- Multiple uses including automotive, commercial and industrial applications
- Durable weatherproof construction is also corrosion resistant
- Flamability Rated
- The industry standard in vibrational damping technology
Applications
- 2 Pack – Speaker
- 4 Pack – 4 Speakers / Dash
- 6 Pack – Hatchback
- 8 Pack – Door / Ceiling
- 10 Pack – Trunk
- 20 Pack – Complete Interior
- 30 Pack – Complete Interior – SUVs, Vans, Wagons, etc.
|
What’s in it for you…
|
Where to use:
|
$35.00
NEW AND IMPROVED! Our new 2mm version of damping material is 33% thicker than our original material.
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and itโs strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in aย variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
- High performance adhesive maintains adhesion throughout temperature extremes
- Eliminates low frequency noise problems
- Non-hazardous material
- Flexible โ can be applied to irregular surfaces
- Easily trimmed to size with Boom Mat Blade Lock Knife
- User friendly peal and stick installation
- Multiple uses including automotive, commercial and industrial applications
- Durable weatherproof construction is also corrosion resistant
- Flamability Rated
- The industry standard in vibrational damping technology
Applications
- 2 Pack – Speaker
- 4 Pack – 4 Speakers / Dash
- 6 Pack – Hatchback
- 8 Pack – Door / Ceiling
- 10 Pack – Trunk
- 20 Pack – Complete Interior
- 30 Pack – Complete Interior – SUVs, Vans, Wagons, etc.
|
What’s in it for you…
|
Where to use:
|
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Pack Size | 4 Pack, 10 Pack, 20 Pack |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Uncategorized
Cool-Tape – Heat Reflective Tape (DE-CT)
Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000ยฐF of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. ย Comes as a 2″ x 30′ roll.
- Withstands direct heat up to 400ยฐF and 2000ยฐF radiant heat
- Flexible and easy to apply
- Strong self-adhesive backing
- Use to secure panels, seal air boxes, wrap wiring & more
SKU: DE-CT -
Uncategorized
Clear Lens White LED Courtesy Lights (IL-53)
These lights are a sharp and simple option for courtesy lighting. The light is a nice neutral white that will illuminate your whole foot box. Simply drill a center hole and screw it down in place, then push the front cover on. Dimensions are 3″ wide by 2″ tall. Price is for a pair.
SKU: n/a
