Do-It-Yourself RED LED Strips (L73)
Red LED’s for Do-It-Yourself projects. All strips are 5/16″ wide X 1/2″ high (overall) X the length listed below.
As Do-it-yourself items, these are sold without warranty.
$10.00 – $65.00
Red LED’s for Do-It-Yourself projects. All strips are 5/16″ wide X 1/2″ high (overall) X the length listed below.
As Do-it-yourself items, these are sold without warranty.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Size | 5-LED strip, 1-1/4" long, 10-LED strip, 2-9/16" long, 15-LED strip, 3-7/8" long, 20-LED strip, 5-3/16" long, 25-LED strip, 6-1/2" long, 30-LED strip, 7-3/4" long, 35-LED strip, 9-1/16" long, 40-LED strip, 10-3/8" long, 45-LED strip, 11-5/8" long, 50-LED strip, 12-7/8" long, 55-LED strip, 14-1/8" long, 60-LED strip, 15-3/8" long |
Product Instructions
View or Download the Product Instructions
L73-5.pdf L73-10.pdf L73-15.pdf L73-20.pdf L73-25.pdf L73-30.pdf L73-35.pdf L73-40.pdf L73-45.pdf L73-50.pdf L73-55.pdf L73-60.pdfYou may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Car Interior LED Lights
Blue LED Illuminator
An LED that’s bright enough to use for illumination? YES! Leave it to StreetWorks to find it. Use this little beauty for lighting up your glove box or ash tray, add accent lighting inside or out (imagine putting one in each of the hood holes of an old Oldsmobile!) It’s very small size makes it easy to snap into a .156″ hole or just RTV or epoxy in place. Pale blue color provides a nice hue at night. NOTE: This LED is too bright for use as an indicator light! See our LED Indicators under Indicator Lights.
SKU: L18BRB-5/32 -
Custom Marker Lights, Hot Rod Exterior Lighting
4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
Custom Marker Lights, Hot Rod Exterior Lighting4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
The amber light has 12 super bright amber LEDโs. The red light has 15 super bright red LEDโs Both lights have clear lenses (4-1/4โ long, 1/2โ wide, 1/4โ deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
SKU: L89 -
Hot Rod Exterior Lighting
1157 LED Amber Bulbs, pair (25024)
Finally, an 1157 LED replacement bulb that can be seen from all directions. These dual element bulbs will work in your existing sockets.ย It comes with 4 bright LEDs on the sides as well as the tip. It measures less than 2 ยผโ long by ยพโ wide. These LED replacements shine brighter than their original counterparts offering a visually appealing brightness. These LED lights will provide years of trouble free service.ย Sold in pairs.
SKU: 25024 -
Car Interior LED Lights
LED Interior Light with Switch (L85)
A sweet littleย LEDย Interior Light. The lens measures just 7/8″ x 3″ and when you rotate the lens either way, the light turns on. It can also be externally switched. Install with the oval mounting flange showing (it’s 2-1/16″ x 5″) or hide it behind the mounting surface with just the lens showing. Needs about 1-1/4″ rear clearance. Screws included.ย Comes with a chrome bezel that covers the black plastic shown in the picture.
SKU: L85
