Oval Billet Power Window Toggle Switch
Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
$98.00 – $269.00
Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
https://www.rodauthority.com/features/car-features/1957-buick-roadmaster-built-highway/
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Switch Type | Oval Triple, Dimpled, Oval Single, Paddle, Oval Double, Dimpled, Oval Double, Paddle, Oval Single, Dimpled, Oval Triple, Paddle |
| Finish | Brushed Finish, Raven Black Finish |
Product Instructions
View or Download the Product Instructions
L39BOS.pdf L39BOD.pdf L39BOT.pdf What-is-a-Polarity-Reversing-Motor.pdfYou may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod Power Window Switches
Single Billet Power Window Switch (L39BS#), Rectangle
Our Billet 3-wire single power window rocker switch sits in a billet frame thatโs only 1-1/8โณ wide by 1-3/4โณ high. Adapt directly to positive (+) output remotes โ no extra relays required!
Single Switch
Includes: Single switch & frame, polarity reversing module, wire leads and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BS# -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
This kit gives you an oval 3 switch panel with paddle rockers for the drivers door to control both front window and door locks. ย You will also receive a 2 switch panel for the passenger door that controls the passenger window and door locks. ย This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions.
SKU: L39BOTDLP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
3 Switch Panel
A single location (console) 3 switch control panel that measures 4″ wide by 1ย -5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
SKU: L39BO3X -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Rectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesRectangular Paddle Power Window Switch Kit for 3 Regulators (L39B3XP)
3 Switch Panel
A single location (console) 3 switch control panel that measuresย 2 – 3/4″ wide by 1ย – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3XP
