Power Trunk Lift Kit 100# Actuator (CA-PTL100)
Carolina Custom’s Power Trunk Lift Kits
Power Trunk Lift Kit 100# Actuator
Uses an industrial linear actuators for power – not just a window regulator. Works through a single pivot hole so there’s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk.
$390.00
Carolina Custom’s Power Trunk Lift Kits
Power Trunk Lift Kit 100# Actuator
Uses an industrial linear actuators for power – not just a window regulator. Works through a single pivot hole so there’s no ugly slot in your trunk upholstery. Only the billet arms and trunk bracket show when installed. Has all the hardware, brackets, arms and switch. The steel frame is designed to be able to install on either side of the trunk. **This part will ship 2 weeks after order from Mfg.**
| Weight | 1.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
Related products
-
Specialty Flashers & Relays
Power Cowl Vent Kit (L34)
Give your cowl vent a lift with this powerful gear motor kit that comes complete with gear motor, brackets, hardware, interior switch, wire, connectors, and instructions. Steel bracket for cowl can be bolted or welded. Attractive 5″ aluminum rod arm gives a clean look. Motor with mounting bracket and lever arm measure 2-1/2″ wide, 4″ high and 3-1/4″ deep including motor, not including 5″ connecting arm. Also works for power glove box door.
The motor is not waterproof.
SKU: L34 -
Hood and Trunk Hinges
Steel Trunk Hinge Kit (CA-STHK)
From Carolina Custom – No visible welds when installed. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins Instructions.
SKU: CA-STHK -
Remotes & Keyless Entry Systems
Gear Motor Actuator (WI-29)
For Gator-Jaws and some original latches made after about 1960, these actuators will provide the power needed to trip the latch. This gear motor actuator has 12 pounds of both push and pulling power.ย With 7/8โ of travel you can use it for door locks, trunk latches and more. These will also work for door locks when used with a polarity reversing module (such as our #L07-W). The actuator comes with the mounting and connecting hardware shown. (Actuator measures 5โณ long x 2โณ High x 1โณ Deep) The unit works in both directions so these are great for power lock & unlock doors.
SKU: WI-29
