Pre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Pre- 1949 splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
$150.00
-
Hot Rod Handle Switch Kits and Power Window Crank Switches
Pre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesPre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Pre- 1949 splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-GM -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver canโt control the passengerโs window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driverโs window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds.ย By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds.ย Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC
Pre- 1949 splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Custom Hot Rod Window Cranks, Custom Door Hardware, Windows Cranks & Switch Knobs
Salt Flat Window Cranks (TQ-SF**)
Custom Hot Rod Window Cranks, Custom Door Hardware, Windows Cranks & Switch KnobsSalt Flat Window Cranks (TQ-SF**)
Trique Manufacturing’s Salt Flat Series door handles, window cranks, and vent window cranks are inspired by the lightening holes that were found in so many nostalgic vehicles that raced the famous Bonneville Salt Flats. While the holes served a purpose on many vehicles that raced the flats, it later became a style that can be found on many custom cars today. We liked the look so much that we designed a door handle and window crank set that took the look and moved it to the inside of your vehicle. Each handle and crank is precisely waterjet cut from stainless steel then polished to a beautiful luster. The base, cap, and knobs are machined billet aluminum and are fully polished as well. Our screw cover caps house a strong magnet that attaches itself to the heads of the mounting screws offering a secure fit while allowing you to remove it later without marring the part. Choose your door handles or window cranks below. Sold in pairs.
- Compliments any interior.
- Stainless steel handle, Billet aluminum cap, and base.
- Magnetic cap prevents marring should you have to remove it.
- Universal hub fits all handle shafts.
- Designed and Made in the USA
- Length of Salt Flat Door Handle – 4 3/4″
- Length of Salt Flat Window Crank – 4 3/4″
- Length of Salt Flat Vent Window Crank – 3 1/4″
- Height of handle base – 3/4″
SKU: TQ-SF** -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Hot Rod Power Window Switches
4 Door 2 Over 2 3 Wire Paddle Rocker Switch Kit (L39B2/2-4DP)
Beautiful billet 3ย wire power window switches now in kits for 4-door cars.ย Comes withย paddle rockers.ย You get aย 2 over 2 switchย panel for the driver’s door and 3 single switch panels for each of the other doors.ย The billet panels and rockers have a brushed aluminum finish.ย
Kit includes:ย switches with panels, polarity reversing modules,ย wiring connectors,ย and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B2/2-4DP -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
This kit gives you an oval 3 switch panel with paddle rockers for the drivers door to control both front window and door locks. ย You will also receive a 2 switch panel for the passenger door that controls the passenger window and door locks. ย This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions.
SKU: L39BOTDLP -
Hot Rod Handle Switch Kits and Power Window Crank Switches
1949 & Up Splined Shaft Street Rod Power Window Switches (CA-EPWS-49)
Hot Rod Handle Switch Kits and Power Window Crank Switches1949 & Up Splined Shaft Street Rod Power Window Switches (CA-EPWS-49)
1949 and Up splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-49
