Water proof LED Strips
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches. Click on the “add to cart” box to select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
$8.00 – $85.00
These LED strips are encased in clear waterproof plastic so use them where ever you want. They have peal & stick backing and just to be sure we include mounting clips as well. Each flexable strip is 1/2″ wide and about 1/4″ thick. We sell them in lenghts from 2″ย to 36″, and they come in 5 colors, red, amber, blue, cool white and warm white. Each light you order has lead wires attached.ย The strips are marked in 2″ segments (3 LEDs per segment). You can actualy cut them at the marking, attach new leads, seal the ends and you have a 2nd light!
Prices range from just $8.00 for a 2″ strip up to $84.00 for a full 36 inches.ย select your color & length.
Get creative! From foot box or trunk lights to full blown under car ground effect lighting this is the solution you’ve been looking for.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Type/Color | 2" Red LED Strip, 18" Red LED Strip, 4" Red LED Strip, 12" Red LED Strip, 2" Amber LED Strip, 36" Red LED Strip, 10" Red LED Strip, 6" Red LED Strip, 24" Red LED Strip, 12" Blue LED Strip, 8" Red LED Strip, 24" Blue LED Strip, 4" Amber LED Strip, 18" Blue LED Strip, 36" Blue LED Strip, 8" Blue LED Strip, 10" Warm White LED Strip, 30" Blue LED Strip, 10" Blue LED Strip, 4" Warm White LED Strip, 18" Warm White LED Strip, 8" Warm White LED Strip, 2" Blue LED Strip, 6" Warm White LED Strip, 4" Blue LED Strip, 6" Blue LED Strip, 6" Cool White LED Strip, 24" Warm White LED Strip, 10" Cool White LED Strip, 8" Cool White LED Strip, 36" Warm White LED Strip, 4" Cool White LED Strip, 18" Cool White LED Strip, 30" Warm White LED Strip, 8" Amber LED Strip, 30" Cool White LED Strip, 12" Warm White LED Strip 23065, 12" Cool White LED Strip, 30" Amber LED Strip, 24" Cool White LED Strip, 2" Cool White LED Strip, 18" Amber LED Strip, 10" Amber LED Strip, 24" Amber LED Strip, 36" Cool White LED Strip, 36" Amber LED Strip, 30" Red LED Strip, 2" Warm White LED Strip, 6" Amber LED Strip, 12" Amber LED Strip |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12***
Related products
-
Hot Rod Exterior Lighting
LED Light’N Boltz License Plate Light Assembly Kit
Polished Stainless Steel Dome-head bolts with LED’s to illuminate your license plate. 5/16-18 x 3/4″ threaded bolts. 2 dome-head mounting/illumination bolts with LED’s plus 2 button-head mounting bolts without LED’s. Includes nuts, wire leads. 12 vdc. Set of four as shown. From Design Engineering Inc.
SKU: DE-LNB4 -
Custom Marker Lights, Hot Rod Exterior Lighting
4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
Custom Marker Lights, Hot Rod Exterior Lighting4-1/4″ Flush Mount Amber Front Lights or Red Marker Lights L89
The amber light has 12 super bright amber LEDโs. The red light has 15 super bright red LEDโs Both lights have clear lenses (4-1/4โ long, 1/2โ wide, 1/4โ deep for sanding) with diffuser, dual intensity convertor, installation hardware and instructions.
SKU: L89 -
Custom Marker Lights, Hot Rod Exterior Lighting
Three 1″ Auto Interior LED Lights (L86 Series)
These bright little 3-LED lights have a variety of uses. They are 1″ diameter overall and mount into a 3/4″ diameter hole. Reds and Ambers are SAE/DOT rated as clearance lights. Provided with an optional stainless steel trim ring.
SKU: L86 -
Hot Rod Exterior Lighting
Billet Frames for L58SM Series LED Lights (L58SM-FR)
If you aren’t into flush mounting taillight or 3rd brake light lenses into the body, these stunning machined billet aluminum frames work with our L58SM kits to allow you to surface mount the lens on the outside of the sheet metal while the LED’s and housing attach to the inside. The small L58SM Frame is 9″ long X just under 1″ wide. It will protrude .400″ off the surface. They accept our lenses perfectly (as shown). All other parts (lens, LED’s, housing, etc) are in the flush mount kits, just add these frames for flat surface mount installation. 3rd Brake Light kits need one frame, Taillight Kits need two frames.
SKU: L58SM-FR
