Indicators
Relays/Flashers
Showing all 13 results
-
Relays/Flashers
C4 Relay Pack (WI-C4)
- 4 relays in a single compact unit
- Each 30 amp relay is double throw.
- Hot or ground trigger
- Relays can be linked for special functions
- No programing, just set a few onboard switches
- Instructions show several relay combo circuits
- Great for upgrading to new sleek switches
- ID your circuits right on the cover
SKU: WI-C4 -
Relays/Flashers
Polarity Reversing Module (#L07W-25)
Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. This Reversing Module is needed when you want to use a switch that doesn’t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control).
Just 1/2″ square x 5/8″ wide – small but mighty!
SKU: L07W-25 -
Relays/Flashers
40 Amp Double Throw Relay SPDT (L07D-40)
40 amp SPDT (double throw) relay that lets you switch between two outputs, ON/ON switching. Can be wired as an anti-theft device with a horn alarm feature so that the horn blows if someone tries to start the car without activating the secret circuit or switch.
SKU: L07D-40 -
Relays/Flashers
40 Amp Relay with Built-in Fuse L07-40F
40 amp SPST with built-in fuse, included
The easiest way to add a power circuit that we’ve ever seen. Just wire the relay between power and the load, add a control switch to trigger the relay and one ground wire… you’re done! No need to wire in an extra fuse holder, no problems because all of your fuses are already used. And it’s really neat, compact and clean. Size the fuse to your load requirements and the circuit is protected.
SKU: L07-40F -
-
Relays/Flashers
80 AMP High AMP Circuit or Ignition Switch “Relief” Relay (Accessory Feed) (L07-80)
Do you realize that the best ignition switches are rated for 30 amps and some for only 15 amps??? And how many amps of accessories are you using? This relay can give a full 80 amps of accessory power and take the load off the ignition switch. Simple hookup (with ring terminals for aftermarket type switches), 10 gauge wire feeds and connectors. Terrific instructions. Also great as a headlight switch relief relay or for any application that you need 80 amps of switching power.
SKU: L07-80 -
Relays/Flashers
Latching Double Throw Relay (30018)
This is just what you need to control your Hi/Lo headlight circuit. Once triggered by a momentary switch, it stays latched in that position. Trigger it again and it switches to the other position. The trigger circuit is ground on this relay. Kit includes lead wires and instructions.
**Works great with our 5 wire window switches**
SKU: 30018 -
Relays/Flashers
Circuit Status Indicator Relay Kit
Ever have a circuit that you wanted specific feedback about – as to when it turned ON and OFF? This Relay kit, along with two indicator lights (not included) will give you that information. Our kit contains the relay, 24″ wire leads, and instruction for use. Works great for radiator fans, battery disconnects, fuel pump, etc. Use with any of our LED indicator lights (for example: green = ON, red = OFF) to provide positive, visual status indication (lights not included).
SKU: L07D-IND -
Hot Rod Wiring Materials, Relays/Flashers
LED Mechanical Flasher (WI-02)
We have found a less expensive alternative to our current solid state flasher. This flasher functions within the same amperage and life expectations of our solid state version. An added benefit to the mechanical flasher is that it makes the “clicking” sound we are all accustomed to when our turn signals are on. This flasher works from as little as 20ma up to 25 amps max. load. This is a round 2 prong flasher that is a direct fit to your current panel. These relays have an additional wire coming out of the top where they must be grounded. Round, 1 3/8″ dia. X 1 3/8″ tall.
SKU: WI-02 -
Relays/Flashers
Electronic Flasher for LED’s (AM-02R)
A direct plug-in to your 2-prong flasher panel socket. This solid-state (electronic) flasher works for loads from as-little-as 20 ma up to a heavy duty 25 amps maximum load. ROUND, 1-3/8″ dia. X 1-9/16″ tall.
Note:
These flashers are directional just like a diode. If you plug this unit in as a direct replacement and it doesn’t work quite right you will have to make some jumpers. You will have to criss cross the wires to the flasher to make it work. This is not common but does happen.
SKU: AM-02R