oval
Showing all 10 results
-
Car Interior LED Lights, Courtesy Lights
LED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Car Interior LED Lights, Courtesy LightsLED Oval Interior Hot Rod Dome Light With Radius Bezel (TQ-OIL)
Trique’s Oval Interior Light is machined from a solid piece of billet aluminum and houses (6) 5mm cool white L.E.D’s behind a dome shaped lens. Each interior light comes fully polished. This interior light features a radius bezel to match many of our other interior components. ย Comes with the mounting bracket.
- Billet Aluminum
- LED Light
- Soft white light versus dingy yellow light
- Comes with mounting bracket
- Made in the USA
Dimensions:
- Footprint = 4.25″ X 1.75″
- Bezel = 5.25″ X 2.125″
- Required depth = .55″
SKU: TQ-OIL* -
Hot Rod Power Window Switches
Oval Billet Power Window Toggle Switch
Our Billet 3-wire rocker switch sits inside an Oval billet frame that’s only 1-5/8″ wide by 2-1/4″ high. Adapt directly to positive (+) output remotes – no extra relays required!
Single Switch
Single switch / frame, polarity reversing module, wire leads and instructions.
Dual Switch
Dual switch kit for center console mounting or for both switches on the driver door only. Dual switch frame is 3-1/8″ wide by 1-5/8″ high, (2) polarity reversing modules, wire leads and instructions.
Triple Switch
Triple kit puts dual switches on the driver door and one on the passenger door. Switches and frames, (2) polarity reversing modules, lots of wire and instructions.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
NOTE:
These are not plug-in replacements for 5-wire switches. Call if you have questions. Reversing modules are needed for power windows. Switches without modules will work for air-ride systems with separate up – down solenoids requiring a positive signal.
SKU: L39BO -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Dimpled Power Window Switch Kit for 3 Regulators (L39BO3X)
3 Switch Panel
A single location (console) 3 switch control panel that measures 4″ wide by 1ย -5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
SKU: L39BO3X -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Paddle Power Window Switch Kit for 3 Regulators (L39BO3XP)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Paddle Power Window Switch Kit for 3 Regulators (L39BO3XP)
3 Switch Panel
A single location (console) 3 switch control panel that measures 4″ wide by 1ย -5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. ย Please use relays if you’re 5 amps or more. ย Polarity reversing modules are required for 2 wire non grounded window kits.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO3XP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Oval Dimpled Power Window Switch Kit for 4 Regulators (L39BO4X)
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesOval Dimpled Power Window Switch Kit for 4 Regulators (L39BO4X)
Now with either Dimpled or Paddle Rockers
Our distinctive Oval Switches can be used for a lot more than just power windows. We can custom make a panel for you.ย We offerย Momentary On/Off, On/Center Off/On, or Momentary On/Center Off/Momentary Onย switches. The panel measures 4-7/8″ wide by 1-5/8″ high.
Donโt know if you have Polarity reversing Motors?ย See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
The switches are rated at 5 amps max. If using for POWER WINDOWSย you will need a polarity reversing module. Give us a call or email us to find out everything you might need with this switch panel.
SKU: L39BO4X -
Custom Door Hardware, Windows Cranks & Switch Knobs
Oval Door Handle Pulls with Radius Bezel TQ-ODP
These machined billet aluminum door pulls from Trique Manufacturingย are offered with a radius bezel or a 30 degree angled bezel to match our other interior components. This one featured has a radius bezel.
- Machined from 6061 Aluminum
- Comes with mounting brackets
- Made in the USA
Dimensions:
- Footprint = 4.5″ X 1.25″
- Bezel = 5″ X 1.5″
- Pocket Depth = .55″
SKU: TQ-ODP -
Custom Automotive Interior Trim Accessories
Oval Hole/Oval Body Brake & Clutch Trim (B02OVS)
Great new Oval shaped body. For elongated or rectangular pedal shafts Also trim the firewall for accelerator cable and kick down or for some TPI applications. 1-5/8″ X 2-1/4″ wide. 5/8″ x 1-1/8″ hole. Stainless steel screws, Rubber gasket, Split ‘n’ Pinned trim. (Oval Split ‘n’ Pinned) For a solid Oval trim, see our #B14OV-PLT
SKU: B02OVS -
Hot Rod Air Conditioning Vents
Trique MFG. Dual Oval A/C Vent with a Radius Bezel (TQ-AVDO)
Trique’s Dual Oval A/C Vents feature a polished billet aluminum housing with polished stainless steel vents that swivel. The housing accepts two standard 2 1/2″ A/C hoses. This dual A/C vent features a 30 degree angled bezel. Each A/C vent comes with mounting brackets and hardware.
ยทย ย ย ย ย ย ย ย Housings are machined from T-6061 Billet Aluminum and fully polished
ยทย ย ย ย ย ย ย ย Vanes are waterjet cut from 316 stainless steel and polished for years of use
ยทย ย ย ย ย ย ย ย Designed, produced, and assembled in the U.S.A.
Dimensions:
ยทย ย ย ย ย ย ย ย Footprint = 6″ X 1.5″
ยทย ย ย ย ย ย ย ย Bezel = 7.5″ X 2″
ยทย ย ย ย ย ย ย ย Required depth = .8″
ยทย ย ย ย ย ย ย ย Finish: Polished
ยทย ย ย ย ย ย ย ย Material: T-6061 Billet Aluminum housing and Stainless Steel vents
ยทย ย ย ย ย ย ย ย Sold individually
ยทย ย ย ย ย ย ย ย Matching Oval Single A/C Vents available
SKU: TQ-AVDO -
Hot Rod Air Conditioning Vents
Trique MFG. Triangular A/C Vent with a Radius Bezel (TQ-AVT)
Trique’s Triangular A/C Vents feature a polished billet aluminum housing with polished stainless steel vents that swivel. The housing accepts a standard 2 1/2″ A/C hose. This single A/C vent features a radius bezel that matches our Dual Oval AC Vent. Each A/C vent comes with mounting brackets and hardware.
ยทย ย ย ย ย ย ย ย Housings are machined from T-6061 Billet Aluminum and highly polished
ยทย ย ย ย ย ย ย ย Vanes are waterjet cut from 316 stainless steel and polished for years of use
ยทย ย ย ย ย ย ย ย Designed, produced, and assembled in the U.S.A.
Dimensions:
ยทย ย ย ย ย ย ย ย Footprint = 2.85″ X 1.5″
ยทย ย ย ย ย ย ย ย Bezel = 3.97″ X 2″
ยทย ย ย ย ย ย ย ย Required depth = .8″
ยทย ย ย ย ย ย ย ย Due to it’s triangular shape these measurements were taken from the longest and tallest part of the vent.
SKU: TQ-AVT
