switches
Showing 1–20 of 28 results
-
Hot Rod Indicators, Relays & Flashers
Polarity Reversing Module (#L07W-25)
Power window motors, power trunk lifts, door locks, etc. need to reverse the direction of rotation of the motor in order to work. This is done by reversing the voltage polarity to the motor wire leads. This Reversing Module is needed when you want to use a switch that doesn’t automatically switch (reverse) both the positive and ground to the electric motor (such as a 3-wire switch or remote control).
Just 1/2″ square x 5/8″ wide – small but mighty!
SKU: L07W-25 -
Custom Switches for Hot Rods
GT3 Custom Toggle Switches (No Dividers)
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. GT2 switches are “stubby” rockers without dividers. We can mix the 3 on a single panel.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and will price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits safe.
GT3 Switches
Single GT3 switch 10119……$ 84.00 Double GT3 switch 10120……$159.00 3 switch panel of GT3 10131…..$236.00 4 switch panel of GT3 10141…..$309.00 5 switch panel of GT3 10152…..$385.00 6 switch panel of GT3 10163…..$470.00 7 switch panel of GT3 10174…..$545.00
SKU: GT3 -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
GT4D Modular Switches
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidently being switched. The GT3 series are without dividers. We can mix the 2 on a single panel as shown on the right.
ISO Symbols, custom engraving and black anodizing is available upon request.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
GT4D Switches with dividers
Single GT4D switch 10010……$110.00
Double GT4D switch 10021……$215.00
3 switch panel of GT4D 10032…..$315.00
4 switch panel of GT4D 10043…..$420.00
5 switch panel of GT4D 10054…..$515.00
6 switch panel of GT4D 10064…..$599.00
7 switch panel of GT4D 10075…..$689.00
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and we’ll price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits
SKU: GT4D -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 2 Rocker Car Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, Double switches are 2-1/2″ long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $149.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp 3 Custom Rocker Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, 3 switch face is 3-5/8″long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $219.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom 4 Toggle Switch Panel
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, 4 switch face is 4-3/4″ long. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $289.
SKU: n/a -
Custom Hot Rod Switch Panels, Custom Switches for Hot Rods
20 Amp Custom Toggle Switch
Our newly designed SS family of switches do it all. Just let us know if you need on-off-on or momentary and we’ll build the ideal switch panel for you. Rated at 20 amps you won’t need relays for most circuits. The lights are a separate circuit so you decide when they are lit. We can even mix finishes if you’d like. Rectangular face-plates are currently available for 1 to 4 switches. Continue to check this page as we’ll soon be offering ovals panels as well. Like our other switches, they are available in Brushed, Polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, single switches are 1-3/8″wide. You will need 1-¾” of back space. Switches come with lead wires attached, mounting clips and instructions. There are literally thousands of combinations available and when we add engraving the switch we build for you will be truly unique to your ride. Along with choosing when the rocker lights are on we can also change them from white to most common colors.
Engraving on the rockers or face-plates is also available.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Give us a call at 866-859-0513 and we’ll be glad to discuss your switching needs.
Pricing starting at $85.
SKU: n/a -
Custom Switches for Hot Rods
Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L75TS-XX -
Custom Switches for Hot Rods
Turn Signal Toggle Switch
Metal Toggle Switch, 7/8” long for right or left turn indication, center off. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10-T -
Push Button/Toggle Switches
Illuminated Billet Push Button Switches (L75)
Illuminated Push Button Switches
These gorgeous low profile switches may be used for a variety of Momentary or ON/Off (latching) switch functions. The LED illumination ring is separately controlled so it can be used as a circuit power indicator or as a locator light that is powered by the vehicle lights. They can be positive (+) or ground (-) switching.
- These switches are available in either Momentary or On/Off (Latching) style switches.
- All switches are available in Blue, Green, Red or White LED illumination.
- The switches are available in either a Chrome or Black finish.
- And, they’re available in either a Small or Large size (see below for description).
The Small switch mounts in a .625 inch (5/8” / 16MM) diameter hole and rated at 3 amps maximum. The face diameter is ¾”. For jobs that require higher amperage, please take a look at our relays.
The Large switch mounts in a .875 inch (7/8” / 22MM) diameter hole and rated at 5 amps maximum. The face diameter is just under 1”. For jobs that require higher amperage, please take a look at our relays.
Available in either Momentary or On/Off functions!
Engraving is available upon request.
SKU: n/a -
Push Button/Toggle Switches
Billet Face Plates for Our SMALLER L75 Series Switches
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
A great way to mount our L75 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side. The plate is 1 ” wide x 2 ” long (or more) and secures with the switch nuts. L75 switches sold separately. (These face plates will not work with our larger L75 switches)
SKU: L75-FP -
Hot Rod Power Window Switches
GT2 Power Window Switch
These are our all new GT2 switches. These switches are sold for use as a power window switch however can be used for virtually anything UPON REQUEST. These all new switches have a slim fit and finish to prevent getting snagged when mounted on the door or console of your vehicle. They have the same design as the GT3 and GT4D panels so they will match the rest of your switches.
IF YOU ARE WIRING A 2 SWITCH PANEL ON THE DRIVERS DOOR AND A SINGLE SWITCH PANEL ON THE PASSENGER DOOR ORDER THE TRIPLE KIT.
Single GT2 switch with reversing module 10219……$ 120.00
Double GT2 switch with reversing module 10220……$220.00
Triple kit GT2 (Comes with a Double and a Single panel with reversing modules) 10231…..$320.00
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 41) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. The GT2 series switches are without dividers have a short rocker so to not interfere while on your door and include polarity reversing modules(intended for power windows / locks but we can still make these however you would like).
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: GT2 -
Hot Rod Power Window Switches
SS Power Window Switches (PW-5)
These new power window switches match our new SS family. We include the polarity reversing module so these switches will work with all modern power windows. The lights are a separate circuit so you decide when they are lit. Like our other switches, they are available in brushed, polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. Switch faces are 2-½” tall, single switches are 1-3/8″ wide and doubles are 2-½”. You will need 1-¾” of back space. Switches come with lead wires, polarity reversing modules, mounting clips and instructions. The triple kit has a double switch on the driver’s door, a single for the passenger and includes cross-over wiring. Use a double alone when center mounting your switches.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
Engraving on the rockers or faceplates is also available. Contact us for polished and engraved pricing.
SKU: PW-5 -
Hot Rod Power Window Switches
SS Oval Power Window Switches (PW-5O)
These new power window switches match our new SS family. We include the polarity reversing module so these switches will work with all modern power windows. The lights are a separate circuit so you decide when they are lit. Like our other switches, they are available in brushed, polished or Raven Black anodized finishes. Choose from our dimpled Infinity style or the sharper edged Chiseled rockers to get the perfect look for your build. single switches are 2-5/16″ T 3-1/4″ W. doubles are 2-5/8″ T 4-3/16 W. Three switch plates are 2-5/8″ T 4-7/8″ W. Four switch is 5-3/8″ T 3-7/16″ W. You will need 1-¾” of back space. Switches come with lead wires, polarity reversing modules, mounting clips and instructions. The triple kit has a double switch on the driver’s door, a single for the passenger and includes cross-over wiring. Use a double alone when center mounting your switches.
SKU: PW-5O -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
Dimpled Aftermarket Universal Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window SwitchesDimpled Aftermarket Universal Power Window Switch Kit
3 Switch Panel
A single location (console) 3 switch control panel that measures 2 – 3/4″ wide by 1 – 5/8″ high.
Includes 60″ of lead wires, connectors and instructions. The switch frame mounts with (4) blind studs from behind.
Switches are rated at 5 amps max. Please use relays if you’re 5 amps or more. Polarity reversing modules are required for 2 wire non grounded window kits.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B3X -
Custom Switches for Hot Rods
Tilt Lever Switch (L33)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. 1/4-28 threads work for GM & other applications.
This beautiful Tilt Lever contains a REAL ON/OFF switch, not just a grounding contact, to give you true switching capability. Add a 40 amp relay and use it to switch nearly anything!
And let’s not forget HI/LO Beam dimming. Our unit comes with a quality, long lasting 40 amp SPDT automotive grade relay and we stand behind this product 100% with our Satisfaction Driven Guarantee. Also works for any ON/ON circuit.
SKU: L33 -
Push Button/Toggle Switches
L75-22 Series Switch Billet Face Plate
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
Show off our L75-22 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side or do a multiple of switching functions. The plates are 1-1/4″” wide and secures with the switch nuts.
We can do almost anything that you want to with these switches. Give us a call to discuss your needs.
SKU: L75-22FP -
Remotes & Keyless Entry Systems
MagTech Magnet Entry System (L20)
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
SKU: L20 -
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
