trunk
Showing all 8 results
-
Remotes & Keyless Entry Systems
Cable Installation Kit for Door Solenoids (L22C)
Why scrounge through hardware stores for the rest of the “kit” that those guys don’t sell? This kit puts together all of the little parts to connect actuators or solenoids to latches… for less than 12ย bucks! Includes 30″ of aircraft cable, a delrinยฎย pulley, wire stay, pulley mounting hardware, cable ends and instructions. Don’t waste time and money – get our kit and make your life a little easier.
SKU: L22C (One Door) -
Car Interior LED Lights
Glove Box/Trunk tilt Switch Kit (L03)
Turns on lights in your glove box, trunk or under yourย hood. Kit includes the switch, mounting screw, and a bright warm white LED strip. The tilt switch has a clear plastic housing to check its operation. The LED strip has adhesive tape for easy and strong mounting.
SKU: L03 -
Hood and Trunk Hinges
Billet Trunk Hinge Kit (CA-BTHK)
Billet Trunk Hinge Kit from Carolina Custom. 6061 T -6 aluminum hinges. Decorative ball milled design. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions.
SKU: CA-BTHK -
Remotes & Keyless Entry Systems
Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
SKU: L22-BS -
Cables and Cable Releases
Cable Installation Kit for Latch Releases (B20C)
For Two Doors:
Get all the pieces to help you connect your latch and latch release. 6+ feet of cable and sheathing (cut to length for 2-doors), 8 sets of plastic clips, screws and nuts. Compression sleeves (fixed end) and cable adjusters.
SKU: B20C -
-
Hood and Trunk Latches
Trunk Lid Latch (D04)
We’ve seen this neat little latch showing up on some of the most eye-catching rods. Cable release ready receiver measures 2-3/8″ x 3-5/16″ wide. The spring loaded stud is 2-3/4″ long, overall, and the adjustable spring loading helps to pop the trunk lid up. The latch has a built-in safety feature requiring cable tension for the latch to close. The finish is zinc yellow chromate. You’ll have to fabricate brackets/supports for attaching both pieces but we know you can do it!
SKU: D04 -
Hood and Trunk Latches
Trunk/Hood Latch and Striker (D03)
This little beauty is called a Rotary Claw Latch. It’s spring loaded, “slams” shut just like a bear claw latch and can be used in a variety of applications like trunks and hoods. It is 1.8″ high from the mounting surface to the top, 1.25″ from the mounting surface to the striker center and the attachment holes are 3.25″ center-to-center. The finish is zinc yellow chromate. Latch has cable release mechanism below the mounting surface. Striker included.
SKU: D03
