Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
$59.00 – $74.00
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Switch Type | Turn Lever with Momentary Switch (40 AMP, SPST relay), Turn Lever With On/Off Switch (40 AMP, SPST, On/Off Relay), Turn Signal With On/Off Switch (40 AMP, SPDT, On/On Relay), Turn Lever with On/Off Switch (3 AMPs max.), Turn Lever with Momentary Switch (3 AMPs max.) |
You may also like…
-
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID -
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; you’ll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at our RFID unit.
SKU: 12***
Related products
-
Releases
Thin Oval Neat Nob Latch Release Kits
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOB (with Ball Nobs on right in photo)
SKU: B14NOB -
Releases
Thin Oval Neat Nob Latch Release Kits
What a neat little piece for opening gator-jaw style latches. The thin oval is just 1″ wide x 1-5/8″ tall and comes with your choice of (3) nob styles – a smooth nob, a turned nob or our new polished ball nob (1″ diameter for easy handling). The trim oval mounts with stainless steel screws, provided. Sold in 2-door kits.
B14NOT (with Turned Nobs in center in photo)
SKU: B14NOT -
Releases
Interior Neat Nob Interior Door Release Switches
Your interior never had it so good. Clean and Elegant design to match the look of billet power window switch plates or to add stand-alone beauty to your doors. And the best part is still how great they work. 1-3/4″ square trim plates. Smooth, Turned or Ball Nobs. Stainless Screws.
SKU: B14Q -
