Contemporary Turn Lever Switch (L43G)
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
$59.00 – $74.00
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
| Switch Type | With 40 AMP, SPST, ON/OFF relay, With 40 AMP SPST Relay with Momentary Switch, Turn Lever with Switch, 3 AMPs max with Momentary Switch, With 40 AMP SPDT, ON/OFF relay HI/LO Beam dimming, Turn Lever with Switch, 3 AMPs max. |
Product Instructions
View or Download the Product Instructions
L43G.pdf L43GD.pdf L43GM.pdf L43GMR.pdf L43GR.pdfRelated products
-
Custom Hot Rod Shift Knobs, Custom Door Hardware, Windows Cranks & Switch Knobs
Contemporary Column Dress-up Knobs (L44G)
Custom Hot Rod Shift Knobs, Custom Door Hardware, Windows Cranks & Switch KnobsContemporary Column Dress-up Knobs (L44G)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter and Hazards. Both are polished aluminum with stainless steel set screw and Black O-rings as shown.
SKU: L44G -
Custom Switches for Hot Rods
2 speed plus intermittent wiper Kit Specialty Power Windows (67022)
This flex shaft (cable) wiper system is a great solution for Street Rods and customs being built. This universal Dual-Wiper Drive Kit has two wiper shafts that will accept arms that fit 1/2 inch fine spline knurls or arms that fit 1/4 inch shafts. The output shafts are driven by a remote mounted commercial duty 2 speed wiper motor.
This motor has 300 in. lbs. stall torque. The sweep is adjustable from 90 degrees to 160 degrees in 10 degree increments. (Both wipers will sweep the same amount). This dual wiper kit has 2-speed intermittent self-park switch. included and will accept many of our knobs.
This kit is best SUITED FOR CARS UNDER CONSTRUCTION. Some applications will require modifications to the original wiper shaft holes. Comes with written and video instructions. (Kits Do Not Include Arms and Blades) Standard kits come with a 72″ drive cable.
SKU: 67022 -
-
Custom Switches for Hot Rods
GT3 Custom Toggle Switches (No Dividers)
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 39) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. GT2 switches are “stubby” rockers without dividers. We can mix the 3 on a single panel.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
We have shown pricing here for 1 to 7 switches. We can build longer panels, just call us for a quote.
Want lights? We have them in green, red, amber and blue. Add $7.00 for each light. Be sure to tell us how you want the lights to function. We can wire up exactly what you need. If you want some dividers but not on every switch give us call and will price it for you. Once again, don’t forget your relays. We have polarity reversing, latching, single pole units to help keep your circuits safe.
SKU: GT3
