Shop
Showing 181–200 of 349 results
-
-
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
-
Custom Switches for Hot Rods
Contemporary Turn Lever Switch (L43G)
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
SKU: L43G -
Uncategorized
Cool-Tape – Heat Reflective Tape (DE-CT)
Cool Tape is a flexible and super strong self-adhesive thermal insulating tape capable of protecting up to 2000°F of radiant heat. Made of one mil aluminized material bonded to a woven glass fiber heat resistant matting, Cool Tape is a ultra light weight heat reflective solution for wrapping wires, cables, hoses, fuel lines, covering seams and many other uses. Comes as a 2″ x 30′ roll.
- Withstands direct heat up to 400°F and 2000°F radiant heat
- Flexible and easy to apply
- Strong self-adhesive backing
- Use to secure panels, seal air boxes, wrap wiring & more
SKU: DE-CT -
Specialty Flashers & Relays
Digital Gear Shift Sending Unit (DK-GSS3000)
Now Self Adjusting!
Dakota Digital’s universal, adjustable gear shift indicator sending unit. Works with GM TH350, TH400, 700R4, 4L60, 4L80, and powerglide; Ford C-4, C-6 and AOD; Mopars and many others. Full electronic adjustability from inside the car – no magnets to align. Built-in neutral safety switch and reverse back-up light circuits. Comes complete with mounting hardware pack, electronic sending unit, and gear shift decoder. Works perfectly with StreetWorks LED Gear Shift Indicator Lights and Combination LED Turn Signal/ High Beam Shifter Indicator Lights.
SKU: DK-GSS2000 -
Custom Automotive Interior Trim Accessories
Dash Mount Single USB Supercharger (IT-PORT)
Dash Mount Single USB Supercharger
Fast 2.4A charging now available with a clean and seamless OEM appearance. Can be installed in the dash or can be mounted in the supplied dash mount or, in a center console.
- Durable construction
- Aluminum housing ensures maximum heat dissipation to ensure longevity of the charger circuit.
- Panel, Console or Dash Mountable
- 2 wire hookup
- Includes in-line fuse
- Charge your phone 2.5x faster
- Fits in ¾” hole
SKU: IT-PORT -
Hot Rod & Automotive Interior Display Trim
Dual Port Billet USB charger and Volt Meter (IT-USB)
This beautiful Billet USB Charger and Volt Meter will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USB -
Hot Rod & Automotive Interior Display Trim
Dual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
Hot Rod & Automotive Interior Display TrimDual Port USB charger / Volt Meter with Polished Aluminum Face (IT-USBP)
This is our beautiful brushed Billet USB Charger and Volt Meter with a polished aluminum face. It will charge 2 phones or other devices while you’re on the road. It measures 1 ¾” dia. face, 2 ½” deep, and fits in a 1 ½” hole. This handy unit also checks the vehicle’s voltage.
The LED Display shows the power/charging status of the device(s) plugged into it. Both ports are high output ports. Capable of pushing 2.4 amps per port and has the typical USB charger of 5.0 volts.
Product comes with wires, mounting bracket and screws and, instructions.
SKU: IT-USBP -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver can’t control the passenger’s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver’s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC -
Uncategorized
Floor & Tunnel Shield II – Heat & Sound Insulation (DE-TS)
SAME GREAT PRODUCT, NEW DESIGN!
Designed to provide the best possible heat protection in areas where high temperatures are always present and problematic, Floor & Tunnel Shield II limits heat transfer on fire walls, transmission tunnels, floor boards, fuel cells and other areas where heat is an issue. Floor & Tunnel Shield II provides excellent light weight thermal protection, acts as a guard against track and road debris, and provides sound deadening as well.
Constructed with an embossed 10 mil aluminum face bonded to 1/8” composite glass-fiber core and backed with a high temp super strong pressure sensitive backing, Floor & Tunnel Shield II withstands up to 1750°F of direct continuous heat. The adhesive side holds past 450°F. Its improved multifaceted modern aluminum surface offers improved reflectivity and rigidity and allows for ease of installation. At only 3/16” thick, this product can be shaped and trimmed for a custom fit and is ideal for minimal clearance areas.
With a unique and patented finely woven glass-fiber backing, Floor & Tunnel Shield II is the easiest, most cost effective way to control thermal transfer while protecting expensive components and vehicle occupants from extreme heat situations and sound.
Floor & Tunnel Shield II can be used on any number of surfaces including, metal, aluminum, carbon fiber, plastic, and more. Multiple uses include: fire walls, under hoods, transmission tunnels, floor pans, fuel cells, and exterior under vehicle locations – anywhere to reflect damaging heat.
Use as a barrier to reflect and insulate from any heat source.
Available in 21″ x 24″ sheets
- Ideal for firewalls, under-vehicle, floor pans, oil tank box areas, transmission tunnels, wrapping fuel cells, under hoods & more
- Blocks radiant heat from entering driver compartment
- Withstands direct high heat temperatures up to 1750°
- Serves as a barrier to unwanted road, tire, & engine noise
- Constructed from 10 mil aluminum bonded to finely woven layer of high temperature resistant glass fiber
- Easy to form to shapes and contours
- Excellent heat & sound barrier
- Wind and water will not affect adhesive
- Minimum clearance required, only 3/16” thick
- Just trim, peel & stick
- Aggressive self-adhesive backing holds past 450°F
- Withstands 1750°F direct continuous heat
- Use to shield & reflect unwanted heat
- Multiple uses
- Adheres to almost any surface or material including to fiberglass
What’s in it for you…
- Protection for engine compartments
- Protection for painted body panels
- Comfortable interior at any temperature
- Quick and easy installation
- Hi-temp adhesive for a “do-it-once” install
Where to use:
- Fire walls
- Transmission tunnels
- On floor boards above header collectors, Catalytic converters, Mufflers and exhaust pipes
- Fuel cells
- Motorcycle fairings
- Engine covers (dog house)
- Marine & RV compartments
- Reflect turbo heat
SKU: n/a -
Uncategorized
Fuzz Buds: Handsfree Fuzzy Dice **DISCONTINUED**
Hands free fuzzy dice
Safety – Style – Function
SORRY BUT THIS PRODUCT IS NO LONGER AVAILABLE. Easy setup with built in microphone & stereo speakers makes hands free calling safe & easy.
Works with your smart phone for calling, music, navigation & more.Rechargeable long play battery. USB charging cord included. Great in the shop or at cruise nights too.
SKU: IT-FD -
Automotive Door Latches & Parts
Manual Safety Lock Pins
Carolina Custom’s Manual Safety Lock Pins
They’re constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1″ thick x 2″ tall x 3-1/2″ long. Built-in micro switches allow you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors.
SKU: CA-MSP -
Automotive Door Latches & Parts
Power Door Locks (Pair) (CA-PDL)
Carolina Custom’s Power Door Locks
They’re constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1-3/8″ thick x 2″ tall x 8″ long. Built-in micro switches allows you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors or if you have installed bear claw latches which cannot be locked otherwise.SKU: CA-PDL -
Automotive Door Latches & Parts
Gator-Jaw Latches (L24)
The standard for replacing old door latches. These “trip” rotory latches meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force. The single rotor latch with “L” shaped release lever assures quick release action from either of two directions (down or horizontal). Latch body measures 3-7/8″ x 1-1/4″ x 13/16″ with threaded holes and installs with 1/4-20 fasteners, not included.
SKU: L24 -
Automotive Door Latches & Parts
Locking Gator-Jaw Latches (L24LK)
You’ve wanted them… and StreetWorks has them. Medium size, single rotor, “trip” latches and strikers meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force – AND THEY’RE LOCKABLE! All of the features of our L24 latches plus the added feature of lockability. Push the lock lever down and the latch is locked, up and it’s unlocked. Works with lock actuators and or with interior door lock “buttons” found on many cars. Bring your ride into the 21st Century with the best replacement latch available. SOLD IN PAIRS ONLY.
SKU: L24LK
