Shop
Showing 81–100 of 349 results
-
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift Knobs
Contemporary Column Dress-up Knobs (L44G)
Custom Door Hardware, Windows Cranks & Switch Knobs, Custom Hot Rod Shift KnobsContemporary Column Dress-up Knobs (L44G)
And to finish the job, get our Column Dress-up Knobs for the Column Shifter and Hazards. Both are polished aluminum with stainless steel set screw and Black O-rings as shown.
SKU: L44G -
Cables and Cable Releases
Emergency Door Release Kit (TP-BKD-1)
Even the very best electrical entry systems could go bad. This Emergency Door Release Kit gives you the mechanical back-up way to trip the driver door latch and get into your car. Kit contains 8+ feet of encased cable, stainless steel braided door wire loom with billet ends to run the cable through and into the door, billet pull knob with set screw, cable clips and mounting hardware. Easily run into the engine compartment or under a fender well. Why leave yourself unprotected? Made in America by Itsashoka Innovations.
SKU: TP-BKD-1 -
Cables and Cable Releases
Billet Knob Cable Release (CC-UB10)
A straight-forward, attractive machined billet knob with a 120″ cable so you can open your hood or deck lid. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 3 cable clamps.
SKU: CC-UB10 -
Cables and Cable Releases
Single Lever Cable Release (CC-S7)
An attractive machined billet aluminum unit. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 2 cable clamps. Choose from a 7 foot cable or a 15 foot cable.
SKU: cc-s7 -
Cables and Cable Releases
Single Lever 15 Foot Cable Release (CC-S15)
An attractive machined billet aluminum unit. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 4 cable clamps. For deck lids and longer needs, comes in a 15 foot cable length.
SKU: cc-s15 -
Hot Rod Exterior Lighting
Double-D LED Taillights (L58-DDR)
Double-D taillights with twice the diodes. Two strips of 60 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 40-20 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 15-1/4″ long. Mounting hardware and dual intensity convertors included.
SKU: L58-DDR -
Hot Rod Wiring Products
10 Fuse;Fuse Block WI-6010
Each fuse circuit is fed separately. Rated 30 amps max per fuse. Side blade input and output on opposing sides and the terminals are provided, as well as the mounting screws. Overall dimensions are:ย 7 1/4″ย long x 2 1/16″ wide x 2-1/16″ high, including the protective dust cap screw. For ATO/ATC type fuses rated for a max of 150 amps.
SKU: WI-6010 -
Hot Rod Exterior Lighting, Hot Rod LED Brake Lights
Small Double-D LED Taillights (L58SM-DDR)
Two strips of 30 Super Bright Red LED’s per light, inside an aluminum housing. 1/4″ thick build-in, flush mounted red acrylic lenses with prismatic diffusers. Each strip is split 20-10 and the strips are wired separately so that you may wire the strips together or not. Work with integral turn/brake systems or vehicles with separate turn signals. The lenses are 1/2″ wide x 7-1/2″ long. Mounting hardware and dual intensity convertors included. ย Sold in pairs.
SKU: L58SM-DDR -
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior Lighting
Double-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Aftermarket Backup Lights for Hot Rods, Hot Rod Exterior LightingDouble-D LED Taillights with Bright White LED Backup Lights (L58-DD-BU)
Double-D taillights with twice the diodes – two strips of 50 super bright LEDโs per light plus super bright white LEDs for backup lights all inside an aluminum housing. Build-in, flush mount clear acrylic lenses are 1/4โ thick, 1/2โ wide and 15-1/4โ long plus diffuser. Each red strip is split 30-20 and are wired separately so that you can wire the strips together or not. Works with integral turn/brake systems or on vehicles with separate turn signals. Hardware and dual intensity convertors included.
SKU: L58-DD-BU -
Hot Rod Wiring Products
Sequencing Taillight Kit (L58-TSK)
Make your own Sequencing Taillights with our new kit. Provides modules, connectors and instructions to turn your three-lights-per-side taillights (bulb or LED) into sequencing taillights. If your have only (2) light segments that you want to have flash alternately.
Not compatable with modern vehical Body Control Modules.
SKU: L58-TSK -
-
Hot Rod Handle Switch Kits and Power Window Crank Switches
1949 & Up Splined Shaft Street Rod Power Window Switches (CA-EPWS-49)
Hot Rod Handle Switch Kits and Power Window Crank Switches1949 & Up Splined Shaft Street Rod Power Window Switches (CA-EPWS-49)
1949 and Up splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-49 -
Uncategorized
Clear Lens White LED Courtesy Lights (IL-53)
These lights are a sharp and simple option for courtesy lighting. The light is a nice neutral white that will illuminate your whole foot box. Simply drill a center hole and screw it down in place, then push the front cover on. Dimensions are 3″ wide by 2″ tall. Price is for a pair.
SKU: n/a -
Car Interior LED Lights, Courtesy Lights
Interior Courtesy LED Light Kit with Low Profile Magnetic Jamb Switches (IL-04)
Car Interior LED Lights, Courtesy LightsInterior Courtesy LED Light Kit with Low Profile Magnetic Jamb Switches (IL-04)
This is our new and improved courtesy light kit with “hidden” switches. ย This kit includes 2 of our 2″ cool white LED strips, 2 of our brand new magnetic door jamb switches, connectors, wire and instructions. ย Hide this slickย 2 piece switch on the pillar and the other on the door. ย Both pieces are paintable andย mountย into a 3/4″ hole. ย The switch is rated at 2 amps and has a maximum working distance of 3/4″.
SKU: IL-04 -
Car Interior LED Lights, Courtesy Lights
Low Profile Magnetic Door Jamb Courtesy Switch (SW-04)
Are you tired of that ugly switch on your door jamb for your courtesy lights? ย Then this is the switch for you. ย Hide this slickย 2 piece switch on the pillar and the other on the door. ย Both pieces are paintable andย mountย into a 3/4″ hole. ย The switch is rated at 2 amps and has a maximum working distance of 3/4″. ย Switches are sold individually.
SKU: SW-04 -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Pre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesPre-1949 Splined Power Window Switches for Original “Crank” Handles (CA-EPWS-GM)
Pre- 1949 splined power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-GM -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Square Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesSquare Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
3/8″ Square shankย Fordย / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-F
