Shop
Showing 161–180 of 349 results
-
Wire Routing for Hot Rods
Billet ECU Wire Pass Through (WI-001)
An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. ย This wire pass through was designed with large Fuel Injection harnesses in mind. ย The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. ย The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. ย The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensionsย are 4 5/8″ tallย x 2 1/4″ wide xย 11/32″ deep on top andย 2 1/8″ deep on bottom. ย
Inside dimensions are 3 3/4″ tall x 1 3/4″ wideย x 5/8″ deep on top and 1 15/16″ deep on bottom.
SKU: WI-001 -
Custom Door Hardware, Windows Cranks & Switch Knobs
Vintage Air Style Dress-Up Knobs (B14VN)
Have all your dash nobs match your Vintage Air Control unit. Thanks to our friends at Vintage Air, we’ve machined these nobs to match their A/C control panel nobs so you can have a completely uniform, matching interior… Cool Stuff!
SKU: B14VN -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Plug Only (w/stud & o-rings) #B23P
Accepts any 10-32 threaded knob to match your interior. Knobs sold separately. Fit most standard power ports (cigarette lighter)ย ย Our Billet Plug features machined Billet Plug with O-ring retainer, a spare o-ring and a 10-32 threaded stud for attaching the decorative knob of your choice (sold separately).
SKU: B23P -
-
Automotive Switches and Buttons
L75-22 Series Switch Billet Face Plate
THESE ARE FACE PLATES ONLY. MUST ORDER THE ย SWITCHES SEPARATELY
Show off our L75-22 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side or do a multiple of switching functions. The plates are 1-1/4″” wide and secures with the switch nuts.ย
We can do almost anything that you want to with these switches. Give us a call to discuss your needs.
SKU: L75-22FP -
Car Interior LED Lights, LED Dash Indicator Lights
Small Chrome Low Profile LED Indicators (240**)
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are available in two sizes, Small one is 7/16′ and mounts in a 5/16′ diameter hole. Purchase small indicators shown on the right in the picture on this page.
The large one is 5/8″ and mounts in a 15/32 diameter hole. Easy 2 wire connections will make this indicator light a great addition to you project. ย To purchase the Large low profile indicators type “Large Chrome Indicator Light” in the search bar.
SKU: 240** -
Car Interior LED Lights, LED Dash Indicator Lights
Large Chrome Low Profile LED Indicators
These beautiful Low profile LED indicator light add a great look to your dash without being big and bulky. They go great with our “Hot Dot” push button switches. They are avalible in two sizes, โThe large one is 5/8″ and mounts in a 15/32 diameter hole. Purchase large indicators shown on the leftย in the picture on this page.
Small one is 7/16′ and mounts in a 5/16′ diameter hole.ย ย Easy 2 wire connections will make this indicator light a great addition to you project. ย To purchase the Small low profile indicator, type “Small Chrome Indicator” in the search bar.
SKU: 241xx -
Custom Door Hardware, Windows Cranks & Switch Knobs
Billet Levers for Car Locks
All of the power and manual safety locks come with a plastic lever for the manual release. But your car has all the billet goodies! Match it all up with these beautiful billet aluminum levers. Fit 1/4″ shaft with set screw.
SKU: B-RHL -
-
Hood and Trunk Hinges
Bilt-Rite Billet Hinges from Sachse Rod Shop (SA-BH)
The patented Bilt-Rite hinges from Sachse Rod Shop are designed to separate the surfaces while pivoting open. No more rubbing or wearing off paint. These are quality, classy, and versatile. Made of 6061 T-6 aluminum. Can be used in any vertical attachment application like hoods, trunks, tilt front ends, pickup tonneau covers, etc.
Available in 2 sizes. The smaller sets which are 5 1/2″ tall by 7″ long. ย The Large hinges are 7″ tall bt 8 3/4″
SKU: SA-BH -
Hood and Trunk Hinges
Billet Trunk Hinge Kit (CA-BTHK)
Billet Trunk Hinge Kit from Carolina Custom. 6061 T -6 aluminum hinges. Decorative ball milled design. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions.
SKU: CA-BTHK -
Uncategorized
Boom Mat Damping Material (DE-BM)
NEW AND IMPROVED! Our new 2mm version of damping material is 33% thicker than our original material.
Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface.
Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and itโs strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in aย variety of sizes for a cost effective installation.
Use as a first layer for areas with contours and bends for vibration damping needs
- High performance adhesive maintains adhesion throughout temperature extremes
- Eliminates low frequency noise problems
- Non-hazardous material
- Flexible โ can be applied to irregular surfaces
- Easily trimmed to size with Boom Mat Blade Lock Knife
- User friendly peal and stick installation
- Multiple uses including automotive, commercial and industrial applications
- Durable weatherproof construction is also corrosion resistant
- Flamability Rated
- The industry standard in vibrational damping technology
Applications
- 2 Pack – Speaker
- 4 Pack – 4 Speakers / Dash
- 6 Pack – Hatchback
- 8 Pack – Door / Ceiling
- 10 Pack – Trunk
- 20 Pack – Complete Interior
- 30 Pack – Complete Interior – SUVs, Vans, Wagons, etc.
What’s in it for you…
- Enhances stereo performance
- Gives you a quiet and comfortable interior
- Minimal prep and install time
- Performs in extreme temperatures
- Saves you time and money by requiring only 25-50% coverage for optimal performance
Where to use:
- Floors
- Door Skins
- Trunks
- Roofs
- Any vertical or horizontal interior surface
SKU: DE-BM -
Hood and Trunk Hinges
Steel Trunk Hinge Kit (CA-STHK)
From Carolina Custom – No visible welds when installed. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins Instructions.
SKU: CA-STHK -
Uncategorized
Boom Mat Spray-On (DE-BMS)
Boom Mat Spray-On sound deadening is perfect for reducing unwanted road noise and deadening vibrations in those hard to reach places such as trunk interiors, fender wells, undercarriage, body panels, rear quarters and inside door panels to name a few. Boom Mat Spray-On also serves as a thermal barrier insulating against unwanted heat.
Whether you are looking for a quiet ride by eliminating squeaks, rattles, vibrations and unwanted engine and road noise, the benefits of Boom Mat Spray-On sound deadening can be used on any vehicle. Boom Mat Spray-On can be applied in multiple layers for even more sound deadening while handling temperatures up to 300 degrees F. Can be applied to non-coated surfaces and can be top coated with paint after only 6 hours of dry time. Boom Mat Spray-On is VOC (Volatile Organic Compounds) compliant in all 50 states.
- Reduce unwanted road noise and vibration
- Won’t crack or chip
- Helps prevent rust
- Paintable in 6 hours
- Single can will cover approximately 20 sq. ft.
- 18 oz. can
SKU: DE-BMS -
Remotes & Keyless Entry Systems
Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
SKU: L22-BS -
Remotes & Keyless Entry Systems
MagTech Magnet Entry System (L20)
The magnet is the “key” to this trick system. Just place the magnet close to the hidden switch and it will send power to your actuator, solenoid or any momentary switched mechanism. Complete with “keys”, switches, clips, 40-amp relays and a waterproof back-up button in case you misplace the keys.
Please Note: StreetWorks unique wiring plan assures that wires inside the doors are only “hot” when activated, providing added security from short circuits. Also, magnetic fields do not work through steel but the hidden switch can be put under the lip of a fender or running board, behind glass, plastic, fiberglass, aluminum, non-magnetic stainless trim, filler or any non-magnetic material. If you can’t figure out where to put the switch on your steel car, give us a call and we’ll help.
SKU: L20 -
Car Interior LED Lights
White or Blue Low Profile Illuminator LED
Use these 3/8″ square, surface mount LEDsย for interior accent lighting, license plate lights (2 minimum recommended), glove box, ash tray and a hundred other uses. These low profile lights can be put just about anywhere you want with the double sided adhesive we include. Available in blue or white. 100% Weatherproof.
SKU: L91 -
Cables and Cable Releases
Cable Installation Kit for Latch Releases (B20C)
For Two Doors:
Get all the pieces to help you connect your latch and latch release. 6+ feet of cable and sheathing (cut to length for 2-doors), 8 sets of plastic clips, screws and nuts. Compression sleeves (fixed end) and cable adjusters.
SKU: B20C
