Hot Rod Latches, Hinges and Cable Releases
Showing 1–20 of 29 results
Unless your car is just a giant, beautiful paperweight, you want your trunk, hood and doors to open and shut properly. Lucky for you, Watson’s StreetWorks carries a great selection of hot rod hinges and hot rod latches to keep everything in working order. We have all of the latches and catches you need. Looking for a hot rod cable release? We’ve got those, too. Latch onto some street rod hinges and latches from Watson’s StreetWorks today!
-
Cables and Cable Releases
Street Rod Dual Pull Lever Cable Releases (CC-D72)
Our dual pull lever cable release for hot rod cars. This aluminum dual pull lever comes with one 84-inch cable & one 144-ince cable that can pop two hood latches at once. Shop for street rod dual pull lever cable releases online at Watson’s StreetWorks!ย Made right here in America.
SKU: CC-D72 -
Automotive Door Latches & Parts, Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry Systems
True Aero Electronic Flush Mount Car Door Handles (ET-TA)
Automotive Door Latches & Parts, Custom Door Hardware, Windows Cranks & Switch Knobs, Hot Rod Latches, Hinges and Cable Releases, Releases, Remotes & Keyless Entry SystemsTrue Aero Electronic Flush Mount Car Door Handles (ET-TA)
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The kit includes;
2 weld in door handle pockets
The door handles that unscrew from the pocket for body work. (also the activation switch comes out)
RFID Security Module
2 Relay modules that cutoff the pulse to your solenoid after a half second so your solenoid doesn’t burn out as you are pulling your door open.
Waterproof backup switch that will work even if you lose your RFID Fob.
*Solenoids are sold separately per your latch pulling needs*
SKU: ET-TA -
Cables and Cable Releases
Emergency Door Release Kit (TP-BKD-1)
Even the very best electrical entry systems could go bad. This Emergency Door Release Kit gives you the mechanical back-up way to trip the driver door latch and get into your car. Kit contains 8+ feet of encased cable, stainless steel braided door wire loom with billet ends to run the cable through and into the door, billet pull knob with set screw, cable clips and mounting hardware. Easily run into the engine compartment or under a fender well. Why leave yourself unprotected? Made in America by Itsashoka Innovations.
SKU: TP-BKD-1 -
Cables and Cable Releases
Billet Knob Cable Release (CC-UB10)
A straight-forward, attractive machined billet knob with a 120″ cable so you can open your hood or deck lid. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 3 cable clamps.
SKU: CC-UB10 -
Cables and Cable Releases
Single Lever Cable Release (CC-S7)
An attractive machined billet aluminum unit. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 2 cable clamps. Choose from a 7 foot cable or a 15 foot cable.
SKU: cc-s7 -
Cables and Cable Releases
Single Lever 15 Foot Cable Release (CC-S15)
An attractive machined billet aluminum unit. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 4 cable clamps. For deck lids and longer needs, comes in a 15 foot cable length.
SKU: cc-s15 -
Hood and Trunk Hinges
Bilt-Rite Billet Hinges from Sachse Rod Shop (SA-BH)
The patented Bilt-Rite hinges from Sachse Rod Shop are designed to separate the surfaces while pivoting open. No more rubbing or wearing off paint. These are quality, classy, and versatile. Made of 6061 T-6 aluminum. Can be used in any vertical attachment application like hoods, trunks, tilt front ends, pickup tonneau covers, etc.
Available in 2 sizes. The smaller sets which are 5 1/2″ tall by 7″ long. ย The Large hinges are 7″ tall bt 8 3/4″
SKU: SA-BH -
Hood and Trunk Hinges
Billet Trunk Hinge Kit (CA-BTHK)
Billet Trunk Hinge Kit from Carolina Custom. 6061 T -6 aluminum hinges. Decorative ball milled design. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins. Instructions.
SKU: CA-BTHK -
Hood and Trunk Hinges
Steel Trunk Hinge Kit (CA-STHK)
From Carolina Custom – No visible welds when installed. Stainless steel attaching screws. Includes installation kit with 36″ bracket (part in photo is smaller for photographic purposes, bracket may be shortened to fit your specific application), pivot pins, and tabs for pivot pins Instructions.
SKU: CA-STHK -
Cables and Cable Releases
Cable Installation Kit for Latch Releases (B20C)
For Two Doors:
Get all the pieces to help you connect your latch and latch release. 6+ feet of cable and sheathing (cut to length for 2-doors), 8 sets of plastic clips, screws and nuts. Compression sleeves (fixed end) and cable adjusters.
SKU: B20C -
Automotive Door Latches & Parts
Manual Safety Lock Pins
Carolina Custom’s Manual Safety Lock Pins
They’re constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1″ thick x 2″ tall x 3-1/2″ long. Built-in micro switches allow you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors.
SKU: CA-MSP -
Automotive Door Latches & Parts
Power Door Locks (Pair) (CA-PDL)
Carolina Custom’s Power Door Locks
They’re constructed from aircraft quality aluminum and have stainless steel lock pins and mounting hardware for optimum performance and reliability. Slim 1-3/8″ thick x 2″ tall x 8″ long. Built-in micro switches allows you to use a warning light (LED included). May be installed in doors or kick panel area. Great for suicide doors or if you have installed bear claw latches which cannot be locked otherwise.SKU: CA-PDL -
Automotive Door Latches & Parts
Gator-Jaw Latches (L24)
The standard for replacing old door latches. These “trip” rotory latches meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force. The single rotor latch with “L” shaped release lever assures quick release action from either of two directions (down or horizontal). Latch body measures 3-7/8″ x 1-1/4″ x 13/16″ with threaded holes and installs with 1/4-20 fasteners, not included.
SKU: L24 -
Automotive Door Latches & Parts
Locking Gator-Jaw Latches (L24LK)
You’ve wanted them… and StreetWorks has them. Medium size, single rotor, “trip” latches and strikers meet all Federal Vehicle Safety Standards and are rated for 750 pounds of holding force – AND THEY’RE LOCKABLE! All of the features of our L24 latches plus the added feature of lockability. Push the lock lever down and the latch is locked, up and it’s unlocked. Works with lock actuators and or with interior door lock “buttons” found on many cars. Bring your ride into the 21st Century with the best replacement latch available. SOLD IN PAIRS ONLY.
SKU: L24LK -
Automotive Door Latches & Parts
Gator-Jaw Medium weld in plates (L24M)
Weld these plates to your door to give a strong, solid mounting point for your latches. Installation screws – 1/4-20 x 3/4 S/S button socket screws. Available for either full size gator jaws or our mini’s. Sold in pairs.
SKU: L24M -
We've Got Hot Rod Door Latches, Custom Hood Hinges & Cable Releases to Keep Your Classic Ride in Mint Condition
There comes a time in every classic hot rod's life when things aren't working like they used to. Or, more commonly, there comes a time in every restoration project when you realize you can't access certain areas because of old, overworked components. Three of the most common parts you'll need to replace in any classic ride are hot rod door latches, hood hinges and cable releases. That's where Watson's StreetWorks comes in. We carry an extensive selection of street rod hood hinges, custom door latches and cable releases that can help bring functionality and life back into your ride. Whether it's age, weather, lack of lubrication or years of use, these components tend to be among the first to go. Access every inch of your classic ride with custom hood hinges, door latches and cable releases from Watson's StreetWorks.
Replace Your Hot Rod Latches, Cable Releases & Hood Hinges With Our Custom Parts
The unfortunate truth of loving and restoring classic hot rods is that the minor components you rarely think about will eventually need to be repaired. Bad hot rod door latches, cable releases and hood and trunk hinges are all parts that can cause sticking or complete loss of functionality. How are you going to cruise down the open road and show off your vintage beauty if you can't even get behind the wheel? Replacement parts from Watson's StreetWorks are simple solutions to give you access to your ride and modernize at the same time.
Hot rod door latches provide you with modern locking functionality, cable releases can be dual routed to open two lids at once, and custom hood hinges can add a touch of flair unique to your ride. It's simple โ Watson's StreetWorks is the answer every time.
And, if you're obsessed with your vintage components and have a desire to keep things as classic as possible, we can get you the hardware you need to make it happen. That way, you can restore your classic street rod hood hinges or door latches yourself and install them with high-quality hardware you know will fit and last for years.
Frequently Asked Questions About Custom Door Latches, Hood Hinges, Cable Releases & More
Custom hood hinges, cable releases and hot rod latches are small components, so it's only natural that you may have some questions. Here are some of the more common questions we come across regarding our replacement parts.
What Types of Hot Rod Latches Do You Sell?
Hot rod latches from Watson's StreetWorks are available for several different areas of your ride. Our most commonly requested components are hot rod door latches for driver and passenger side doors, but we also sell custom hood latches and trunk latches for your convenience.
How Do I Know My Hood Hinges Are Properly Installed?
When your custom hood hinges are properly installed, secured and aligned, your hood should be able to open and close effortlessly. When shut, the gaps should be straight and even, and the hood panel will sit level on each side. Additionally, your hood hinges should allow the hood to stay raised at the exact point you leave it once opened. Detailed instructions come with every purchase for precise and proper installation.
How Do Cable Releases Work?
Cable releases generally serve to actuate the deck lid latch assembly on your ride. When you pull a cable release, your trunk or hood will pop open whether the key is in the ignition or not. The cable puts tension on the latch mechanism when one pulls the release lever. When let go, the spring tension in the latch will return the lever to its original position and reset.
Shop Watson's StreetWorks for Hot Rod Latches, Cable Releases & Hood Hinges Today
At Watson's StreetWorks, we dedicate ourselves to preserving the classic car and truck industry and keeping the passion alive and well in the minds of enthusiasts everywhere. For well over 30 years, we've provided car builders of all types with top-of-the-line components and parts that keep riders on the road and looking their best. Browse our entire line of hot rod door latches, custom hood hinges and cable releases today to find the parts best suited for your vintage ride. If you have any questions, contact us directly to talk about how we can help.