Custom Hot Rod Switches
Showing 41–60 of 76 results
-
Hot Rod Handle Switch Kits and Power Window Crank Switches
Square Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
Hot Rod Handle Switch Kits and Power Window Crank SwitchesSquare Shank Ford / Mopar Power Window Switches for Original “Crank” Handles (CA-EPWS-F)
3/8″ Square shank Ford / Mopar power window switches for your original “crank” handles.
Keep that original look and still install power windows in your ride with these switches. A slight push on the crank will open/close the window.
2-Door kit made by Carolina Custom.
SKU: CA-EPWS-F -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
This new kit gives you a 3 switch panel for the drivers side so you can control your Driver’s and Passenger windows along with door locks. You will also receive a 2 switch panel for the passenger side that has the ability to control the passenger window and door locks.
This kit includes the necessary crossover wiring, polarity reversing modules, connectors and instructions.
SKU: L39BOTDL -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with paddle rockers (L39BOTDLP)
This kit gives you an oval 3 switch panel with paddle rockers for the drivers door to control both front window and door locks. You will also receive a 2 switch panel for the passenger door that controls the passenger window and door locks. This kit includes the necessary crossover wiring, switch pigtails, connectors and instructions.
SKU: L39BOTDLP -
Hot Rod Power Window Switches
4 Door Power Window Switch Kit, 2 Over 2, 3-Wire (L39B2/2-4DP)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers. You get a 2 over 2 switch panel for the driver’s door and 3 single switch panels for each of the other doors. The billet panels and rockers have a brushed aluminum finish.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B2/2-4DP -
Hot Rod Power Window Switches
4 Door 2 Over 2 3 Wire Switch Kit (L39B2/2-4D)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with dimpled rockers. You get a 2 over 2 switch panel for the driver’s door and 3 single switch panels for each of the other doors. The billet panels and rockers have a brushed aluminum finish.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B2/2-4D -
Hot Rod Power Window Switches
4 Door Dimpled 3 Wire Switch Kit (L39B4DR)
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with dimpled rockers. You get a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B4DR -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
3 Wire Paddle Rocker Power Window Switch Kit for 4-Door Car
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches3 Wire Paddle Rocker Power Window Switch Kit for 4-Door Car
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers. You get a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B4DRP -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
3 Wire Power Window Switch Kit for 4-Door Car
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches3 Wire Power Window Switch Kit for 4-Door Car
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with either dimpled or paddle rockers. Comes with a 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors. Includes polarity reversing modules, wiring connectors switches and panels with instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DR -
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches
4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Custom Hot Rod Switch Panels, Hot Rod Power Window Switches4-Door Hot Rod Paddle Rocker Power Window Switch Kit
Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers.
Kit includes: 4 switch panel for the driver’s door and 3 single switch panels for each of the other doors. Includes polarity reversing modules, wiring connectors switches and panels with instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39BO4DRP -
Custom Switches for Hot Rods
Tilt Lever Switch (L33)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. 1/4-28 threads work for GM & other applications.
This beautiful Tilt Lever contains a REAL ON/OFF switch, not just a grounding contact, to give you true switching capability. Add a 40 amp relay and use it to switch nearly anything!
And let’s not forget HI/LO Beam dimming. Our unit comes with a quality, long lasting 40 amp SPDT automotive grade relay and we stand behind this product 100% with our Satisfaction Driven Guarantee. Also works for any ON/ON circuit.
SKU: L33 -
Automotive Switches and Buttons
L75-22 Series Switch Billet Face Plate
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
Show off our L75-22 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side or do a multiple of switching functions. The plates are 1-1/4″” wide and secures with the switch nuts.
We can do almost anything that you want to with these switches. Give us a call to discuss your needs.
SKU: L75-22FP -
Custom Switches for Hot Rods
Column Turn Lever Switch (L43)
Polished Aluminum Knob and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single screw through flat end. S/S screw included.
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay.
SKU: L43 -
Custom Switches for Hot Rods
Contemporary Turn Lever Switch (L43G)
Polished Aluminum Knob with Black O-Ring and Stainless Steel Arm with Chrome Switch Bezel and Black Button. Fits GM & other columns with single srew through flat ends. S/S screw included. (Will not replace units that originally had wiper or cruise controls.)
This beautiful Turn Signal Lever also contains a REAL ON/OFF switch. Sold with or without a 40 amp relay. And for HI/LO Beam dimming, our Turn Lever unit comes with a quality, 40 amp automotive grade SPDT relay. Works for any ON/ON switching.
SKU: L43G -
Hot Rod Handle Switch Kits and Power Window Crank Switches
Dual Power Window Controller (PW-DWC)
Crank handle switches are great but not if the driver can’t control the passenger’s window. Leave it to Watsons StreetWorks to finally come up with a solution. Mount this dual controller box under your dash and run wires to both front doors. The passenger switch functions normally until the driver takes over. The drivers switch operates in 3 modes. By just holding the switch up or down the driver’s window responds normally. If the driver first gives the switch a single quick tap it is now controlling the passenger window for the next 20 seconds. By giving the switch 2 quick taps BOTH windows operate together for the next 20 seconds. The unit returns to normal function after the 20 seconds. Works with all power window switches, not just crank handles. Install into your new build or retro-fit into existing builds. Want your windows operating from a remote? This unit works with the remote as well so you can control both front windows with just 2 buttons on the remote. Includes built in relays, enough wire to reach both doors; connectors and instructions.
Note: This unit is not compatible with our Express Window Module.
SKU: PW-DWC -
Custom Switches for Hot Rods
Replacement Volkswagen Ignition Switch (V-IS)
If you’re rewiring your VW and adding accessory circuits you need a new ignition switch that has that feature. Oh, yes. And it would be nice if it fit into the original dash hole…AND if it would clear the ash tray brackets. This is a four position switch (Accessory, Off, On, Start) with a 3/4″ shank, two keys and includes ring terminals for the outputs.
SKU: V-IS -
Custom Switches for Hot Rods
On-Off Pull Switch (L-PS)
Pull On, Push Off. This ain’t rocket science, but it’s a nice little switch. Rated 20 amps. Fits through a 1/2″ Dia. hole. Comes with a black knob,and a chrome trim rig/nut. Use any of our 10-32 dress-up knob fit for a better look Also available is a billet trim ring.
SKU: L-PS
Customize Your Automotive Switch Panel With Custom Hot Rod Switches
You've reupholstered the seats, updated the safety equipment and made the outside shine like the day it drove off the lot – now it's time to finish up the interior of your hot rod with custom car switches. Achieve the look you want in your automotive switch panel with custom switches from Watson's StreetWorks. Hot rod switches give you the functionality you want while remaining true to the classic style of your hot rod. Of course, you'll have plenty of different options to choose from – especially compared to the automotive switches that existed when the manufacturer built your hot rod. Whether you're in the market for crank handle switches or need proper specialty switches, we can build custom automotive switches to control just about anything in your ride. Here at Watson's, our aftermarket switches are built for both durability and functionality using top-rated, premium materials that match the strength and style of your hot rod. Put the finishing touches on your hot rod's interior today with custom car switches from Watson's StreetWorks.
Custom Automotive Switches Upgrade Your Hot Rod to the 21st Century
When it comes time to update your automotive switch panel, you have plenty of options to choose from with custom switches from Watson's StreetWorks. To begin, you need to know what you want to control with your hot rod switches. Choose from functions such as ignition/start, headlights, park lights, wipers and more. Aftermarket switches come in tons of different styles as well – there are many ways you can match the style of your hot rod. You can select custom car switches such as toggle, push-button, rocker or slide switches. Of course, with your hot rod, the small details matter the most. That's why we also give you the option to choose the finish of your automotive switches with all kinds of colors like metallic billet, black and more. When it comes to getting the right look for your custom automotive switches, we make an effort to make sure you get exactly what you need.
Do Your Hot Rod Switches Come With Wiring Assemblies?
When you buy custom automotive switches from Watson's StreetWorks, you're getting more than the switch itself. Our products come with the wiring assemblies needed to get your custom car switches fully installed and working to total capacity. You'll also receive a detailed set of installation instructions.
Can You Engrave My Custom Toggle Switches?
Depending on the type of custom automotive switches you purchase, we offer the option to engrave them with whatever you would like. When we say custom, we mean it. Whether it's simple writing or a specific simple picture you have in mind, we want your custom hot rod switch to match your exact needs.
Do You Offer Illuminated Aftermarket Switches?
Watson's StreetWorks offers both illuminated and non-illuminated hot rod switches. Whether you're restoring your hot rod for car shows or full driving capabilities (including night driving), we have the custom switches that can make your drives easier to navigate.
Find Top-Rated Custom Hot Rod Switches at Watson's StreetWorks
Whether you're looking for one custom automotive switch for a specific purpose or need a full hot rod switch panel for multiple purposes, Watson's StreetWorks is the best in the industry. Our 30+ years of automotive experience allow us to build the perfect custom car switch to meet your exact needs. Update your interior with custom hot rod switches today. If you have any questions about our products, feel free to contact us. Our dedicated team of experts is always available to help.