Booster Spring (L22-BS)
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
$7.00
For those really tough original latches that need an extra “boost” to open, these springs will provide a preload on the latch mechanism so that less force is needed to release the latch. 4-1/2″ long zinc plated high-carbon steel springs have 4.40 pounds/inch of force. The cable connector allows you to adjust the pull to your needs.
| Weight | 0.00000000 lbs |
|---|---|
| Dimensions | 0.00000000 × 0.00000000 × 0.00000000 cm |
You may also like…
-
Hot Rod Ignition Switch Systems
Hot Rod Push Button Starter Switch Kit
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel (22MM) switch mounts in a 7/8″ diameter hole with the overall size of 1′.ย ย The compact ignition module can hide under your dash or in the engine bay.
This kit will work with our smaller (16MM) momentary push button but be warned guys; youโll be using your pinky.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
Note this unit requires securing your car. Check out our battery disconnects or simply install a hidden kill switch or, look at ourย RFID unit.
SKU: 12*** -
Hot Rod Ignition Security Systems
RFID Ignition Security Unit
This all new StreetWorks RFID is designed to work with your Hot Dot Ignition Systems or your existing key. ย This is the security system that your hot rod has been missing.
As you may already know the โHOT DOTโ ignition takes the place of your conventional โkeyedโ ignition switch however it has no security built in.ย This all new RFID Security system gives you the security and convenience that today’s society demands.
What is RFID?ย
RFID stands forย Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna.ย The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1:ย High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2:ย Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it wonโt restart.
Mode 3:ย NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicleโs windows closed.ย If the vehicleโs windows are open we do not have a measurement for how far away the unit will work. ย There are 8 increments of sensitivity that the unit can be programmed to.
SKU: WI-RFID
Related products
-
Remotes & Keyless Entry Systems
“Lucky -7” 7-Function Remote with 3 Transmitters (L-LK7Z)
More functions and more versatility in a new remote control. 7-functions to do nearly anything you want. Functions #1 and #2 trigger 30 amp relays that are built into the receiver for door latch release or reverse polarity operations, too! The other 5-functions control 30 amp relays and can be set up to do (for example) 2-door power windows up and down, plus a trunk release -OR- driver power window up and down, passenger power window down only plus power trunk up and down -OR- well, you get the idea. All with relays. (Note – channel #7 is a pulse output.) User re-programmable. Channels #1 and #2 backup switch leads (switches not included).
Optional Ignition disable. Connectors and great instructions.
SKU: L-LK7Z -
Remotes & Keyless Entry Systems
StreetWorks Door Solenoids (L22N)
You want more power. You want fast action. StreetWorks Solenoids have it. They work the way you want, with 40 pounds of pull so they work with original latches. Solenoids, cables, pulleys, connectors, wire hardware and instructions. Solenoid and bracket measure approximately 2-3/4″ wide x 2-1/16″ high (thick) x 4-1/4″ long.
If you need more power than these solenoids have, you have a door problem.
SKU: L22N -
Hood and Trunk Latches
Trunk/Hood Latch and Striker (D03)
This little beauty is called a Rotary Claw Latch. It’s spring loaded, “slams” shut just like a bear claw latch and can be used in a variety of applications like trunks and hoods. It is 1.8″ high from the mounting surface to the top, 1.25″ from the mounting surface to the striker center and the attachment holes are 3.25″ center-to-center. The finish is zinc yellow chromate. Latch has cable release mechanism below the mounting surface. Striker included.
SKU: D03
