Cable stop Only for 1/16″ cable.
“No-fray” end cable stop 1/16″ Cable (CC-STOP)
Cable stop Only for 1/16″ cable.
$7.50
Related products
-
Hot Rod Power Window Switches
4 Door 2 Over 2 3 Wire Paddle Rocker Switch Kit (L39B2/2-4DP)
0 out of 5(0)Beautiful billet 3 wire power window switches now in kits for 4-door cars. Comes with paddle rockers. You get a 2 over 2 switch panel for the driver’s door and 3 single switch panels for each of the other doors. The billet panels and rockers have a brushed aluminum finish.
Kit includes: switches with panels, polarity reversing modules, wiring connectors, and instructions.
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: L39B2/2-4DP -
Wire Routing for Hot Rods
Billet ECU Wire Pass Through (WI-001)
0 out of 5(0)An attractive cover with machined grooves to dress up where wire bundles pass through the firewall. This wire pass through was designed with large Fuel Injection harnesses in mind. The pass through comes with a fitted grommet with a 1″ precut split top hole for ease of installation and can be trimmed. The grommet can be opened up to a maximum of 1 5/8″ and has relief cuts to assist with trimming. The design of the pass through allows this piece to be added onto a completed vehicle with minimum effort.
Overall dimensions are 4 5/8″ tall x 2 1/4″ wide x 11/32″ deep on top and 2 1/8″ deep on bottom.
Inside dimensions are 3 3/4″ tall x 1 3/4″ wide x 5/8″ deep on top and 1 15/16″ deep on bottom.
SKU: WI-001$119.00 – $124.00 This product has multiple variants. The options may be chosen on the product page -
Cables and Cable Releases
Single Lever Cable Release (CC-S7)
0 out of 5(0)An attractive machined billet aluminum unit. Top quality aircraft cable and durable housing may be cut-to-length. Kit includes housing end cap, “no-fray” cable stop and 2 cable clamps. Choose from a 7 foot cable or a 15 foot cable.
SKU: cc-s7 -
Hot Rod Power Window Switches
Oval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
Hot Rod Power Window SwitchesOval Power Window / Door Lock Switch Kit with Dimpled rockers (L39BOTDL)
0 out of 5(0)This new kit gives you a 3 switch panel for the drivers side so you can control your Driver’s and Passenger windows along with door locks. You will also receive a 2 switch panel for the passenger side that has the ability to control the passenger window and door locks.
This kit includes the necessary crossover wiring, polarity reversing modules, connectors and instructions.
SKU: L39BOTDL