Shop
Showing 21–40 of 349 results
-
Automotive Battery Disconnect Switches & Kits
300 Amp Battery Disconnect (BD-300-X)
Watson’s StreetWorks is now offering a battery cut-off that will handle the largest charging systems. Whether you are looking for a theft deterrent or a simple way to disconnect your battery, this is a great solution. This rugged new sealed unit is built for a continuous load of 300 amps and will handle 2,500 amps for a 10 second surge. Overloading a smaller battery disconnect will burn it out and leave you stranded. This new weatherproof unit measures 5” x 3 ¾” x 2” so hide it wherever you need to. The terminal ends can handle the largest cables. A low amperage bypass circuit keeps your clocks and computers alive. An output is included for an optional status light. Two switch options are available. Switch, hardware and instructions are included.
BD-300-T 300 amp disconnect with toggle switch ….$269.00
BD-300-R 300 amp disconnect with round rocker switch….$269.00
SKU: n/a -
Remotes & Keyless Entry Systems
Gemini 2-Function Remote Control (L-GM2Z)
The Gemini remote control gives you two functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
SKU: L-GM2Z -
Custom Switches for Hot Rods
Manual Cancelling L75 Turn Kit (L75TS-XX)
Get our beautiful L75 series switches in a Manual-Canceling Turn Signal Switch Kit. They have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black casings. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L75TS-XX -
Custom Switches for Hot Rods
Self Cancelling L75 Turn Signal Kit (L75TSSC-XX)
Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. Get our beautiful L75 series 16mm switches in a Timed Self-Canceling Turn Signal Switch Kit (on left in photo). And they have built-in ring LED’s. Specify LED color: blue, green, red or white and switch color: chrome or black. (on left in photo) Order the L75-22 switches and you will get the 22mm version of the L75 series making it much easier for larger fingers to depress the switches.
SKU: L75TSSC-XX -
Custom Switches for Hot Rods
Turn Signal Toggle Switch
Metal Toggle Switch, 7/8” long for right or left turn indication, center off. Good looking switches control 40 amp brake light override circuitry to let you use a single brake/turn bulb (such as an 1157 bulb). Mount in the dash or console. Wire leads, instructions and schematic. (Uses a single two-prong flasher, not provided.) Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10-T -
Custom Switches for Hot Rods
Self Canceling Turn Signal Toggle Switch (L10-TSC)
Metal Toggle Switch, 7/8” long for right or left turn indication, center off. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. (bottom right in photo)
SKU: L10-TSC -
Custom Switches for Hot Rods
Universal Self-Canceling Turn Signal Kit
Our L10R and L10S switches with or without LED’s. Beautiful switches with an adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high.
SKU: L10R/S-PBSC/PBLSC -
Custom Switches for Hot Rods
Headlight Switch (AA-HLS2)
This is a high quality GM style switch complete with shaft, connector plug and terminals. Includes dome or interior light circuit, headlights, running lights and dash light dimmer. And now it comes with a tapered billet knob that matches our Dress-up Knobs #B14TN-X. The switch is rated at 25 amps.
SKU: AA-HLS2 -
Remotes & Keyless Entry Systems
Quadra 4 Function Remote Control with 3 Transmitters (L-QD4)
Our Quadra remote control has four functions – perfect for 2 power windows up-and-down. Or use it to open two doors or other operations plus 2 more functions for trunk release, battery disconnect, etc. Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes (2) built-in 30 amp relays for Channels #1 and #2 plus (2), 40 amp external relays for Channels #3 and #4. 12 ga. power wire leads. Built-in fuse holder with fuses. Pre-wired for Channel #1 and #2 backup switches (switches not included). Wow! It has (3), 4 button transmitters – a button for each function! Optional ignition disable. Connectors, great instructions… and it’s from StreetWorks so you know it’s good.
SKU: L-QD4 -
Custom Switches for Hot Rods
Self-Canceling Timing Module
Self-Canceling Timing Module only, with wires. Adjustable (1 – 45 second) timed shut-off. Switch(es), timing module, relay pack and instructions. Now with our new compact Turn Signal Module – just 1-1/2″ square X 7/8″ high. (upper left, in photo)
SKU: L10-SCTM -
Remotes & Keyless Entry Systems
“Lucky -7” 7-Function Remote with 3 Transmitters (L-LK7Z)
More functions and more versatility in a new remote control. 7-functions to do nearly anything you want. Functions #1 and #2 trigger 30 amp relays that are built into the receiver for door latch release or reverse polarity operations, too! The other 5-functions control 30 amp relays and can be set up to do (for example) 2-door power windows up and down, plus a trunk release -OR- driver power window up and down, passenger power window down only plus power trunk up and down -OR- well, you get the idea. All with relays. (Note – channel #7 is a pulse output.) User re-programmable. Channels #1 and #2 backup switch leads (switches not included).
Optional Ignition disable. Connectors and great instructions.
SKU: L-LK7Z -
Remotes & Keyless Entry Systems
Aftermarket Trilogy Hot Dot Push-Button Start Kit
This is the Hot Dot/ Security System/Remote Package
Here it is the total package! The whole enchilada! Soup to nuts this is it!
What You Get:
Streetworks 22mm Hot Dot Push button starter unit with your choice of button color. Blue, Green, Red or White.
Streetworks brand new to the scene RFID module. No keys and Full on security.
Streetworks remote kit that comes with an all new REMOTE START feature.
Description of contents:
HOT DOT PUSH BUTTON START
Push our Ignition Switch button once and your accessory circuit comes on. A second push and hold engages the starter. When your engine starts just release the switch and your running as well as the LED indicator ring. Press it once more and everything turns off. This gorgeous Stainless steel switch mounts in a 7/8″ diameter hole with the overall size of 1′. The compact ignition module can hide under your dash or in the engine bay.
Compare our price to any other Single Switch Ignition System anywhere! We were the first to bring this system to the street rod market and we know how to do it best!
Check out our full line of matching low profile, push button switches and indicator lights.
RFID
This is the all new Streetworks RFID designed to work with your Hot Dot Ignition Systems. This is the security system that your hot rod has been missing.
As you may already know the “HOT DOT” ignition takes the place of your conventional “keyed” ignition switch however it has no security built in. This all new RFID Security system gives you the security and convenience that todays’ society demands.
What is RFID?
RFID stands for Radio-Frequency Identification. The acronym refers to small electronic devices that consist of a small chip and an antenna. The RFID device serves the same purpose as magnetic strip on the back of a credit card; it provides a unique identifier for that object. And, just as a magnetic strip must be scanned to get the information, the RFID device must be scanned to retrieve the identifying information.
The RFID unit has 3 different operating modes.
Mode 1: High security mode. The car only starts and stays running with the RFID fob in range.
Mode 2: Medium security mode. The RFID fob must be in range for car to start and will stay running until the operator turns it off, then it won’t restart.
Mode 3: NO security mode. Should your fob become lost or damaged you can over-ride the system by entering a code with the hidden button switch.
The RFID is capable of working between 5 and 200 feet with the vehicle’s windows closed. If the vehicle’s windows are open we do not have a measurement for how far away the unit will work. There are 8 increments of sensitivity that the unit can be programmed to.
Trilogy Remote Kit
The Trilogy remote control gives you three functions in perfect harmony to open either two doors, control power door locks, operate one window up and down, operate two power windows down only, etc. And Now, you don’t need extra relays to do some of these things…they’re built-into the receiver!. That’s a $30 – $40 dollar savings right there! Built-in user programming so that if the unit becomes deprogrammed, you can reprogram it yourself! It includes 30 amp relays built into the receiver so you can power solenoids or actuators with power to spare. 12 gauge power wire leads. Built-in fuse holder with fuses included. Pre-wired for Channel #1 and #2 backup switches (switches not included). Each of the 2 transmitters has 2 buttons to give you “single-button” convenience for each function. Optional ignition disable so that doors can’t be accidentally triggered while the car is running. The third channel is strictly a Brand New Remote Starter function specifically for your Hot Dot system. This third channel functions by holding both channel 1 and 2 down at the same time making it very difficult to accidentally start your vehicle. Butt connectors and great instructions. And it’s from StreetWorks so you know it’s good.
OR
Super 7 Remote Kit
More functions and more versatility in a new remote control. 7-functions to do nearly anything you want. Functions #1 and #2 trigger 30 amp relays that are built into the receiver for door latch release or reverse polarity operations, too! The other 5-functions control 30 amp relays and can be set up to do (for example) 2-door power windows up and down, plus a trunk release -OR- driver power window up and down, passenger power window down only plus power trunk up and down -OR- well, you get the idea. All with relays. (Note – channel #7 is a pulse output.) User re-programmable. Channels #1 and #2 backup switch leads (switches not included). 4 Relays are included with this kit and one channel operates the remote start without a relay.
SKU: WI-TRI -
Remotes & Keyless Entry Systems
Gear Motor Actuator (WI-29)
For Gator-Jaws and some original latches made after about 1960, these actuators will provide the power needed to trip the latch. This gear motor actuator has 12 pounds of both push and pulling power. With 7/8” of travel you can use it for door locks, trunk latches and more. These will also work for door locks when used with a polarity reversing module (such as our #L07-W). The actuator comes with the mounting and connecting hardware shown. (Actuator measures 5″ long x 2″ High x 1″ Deep) The unit works in both directions so these are great for power lock & unlock doors.
SKU: WI-29 -
Automotive Switches and Buttons
Illuminated Billet Push Button Switches (L75)
Illuminated Push Button Switches
These gorgeous low profile switches may be used for a variety of Momentary or ON/Off (latching) switch functions. The LED illumination ring is separately controlled so it can be used as a circuit power indicator or as a locator light that is powered by the vehicle lights. They can be positive (+) or ground (-) switching.
- These switches are available in either Momentary or On/Off (Latching) style switches.
- All switches are available in Blue, Green, Red or White LED illumination.
- The switches are available in either a Chrome or Black finish.
- And, they’re available in either a Small or Large size (see below for description).
The Small switch mounts in a .625 inch (5/8” / 16MM) diameter hole and rated at 3 amps maximum. The face diameter is ¾”. For jobs that require higher amperage, please take a look at our relays.
The Large switch mounts in a .875 inch (7/8” / 22MM) diameter hole and rated at 5 amps maximum. The face diameter is just under 1”. For jobs that require higher amperage, please take a look at our relays.
Available in either Momentary or On/Off functions!
Engraving is available upon request.
SKU: n/a -
Automotive Switches and Buttons
Billet Face Plates for Our SMALLER L75 Series Switches
THESE ARE FACE PLATES ONLY. MUST ORDER THE SWITCHES SEPARATELY
A great way to mount our L75 series switches (switches sold separately) – put an Ignition switch and an Accessory switch side-by-side. The plate is 1 ” wide x 2 ” long (or more) and secures with the switch nuts. L75 switches sold separately. (These face plates will not work with our larger L75 switches)
SKU: L75-FP -
Hot Rod Power Window Switches
GT2 Power Window Switch With Single, Double, Triple Options
These are our all new GT2 switches. These switches are sold for use as a power window switch however can be used for virtually anything UPON REQUEST. These all new switches have a slim fit and finish to prevent getting snagged when mounted on the door or console of your vehicle. They have the same design as the GT3 and GT4D panels so they will match the rest of your switches.
IF YOU ARE WIRING A 2 SWITCH PANEL ON THE DRIVERS DOOR AND A SINGLE SWITCH PANEL ON THE PASSENGER DOOR ORDER THE TRIPLE KIT.
Single GT2 switch with reversing module 10219……$ 120.00
Double GT2 switch with reversing module 10220……$220.00
Triple kit GT2 (Comes with a Double and a Single panel with reversing modules) 10231…..$320.00
The modular design of the switch face lets us build you a custom switch panel to control just about anything. Whether you want a single switch to turn on a dome light or a bank of 20 to run everything in the car we can do it.
The switches are all machined from billet aluminum and have a brushed finish. The actual switch can be either momentary-off-momentary or on-off-on. All switches are rated at 5 amps so you may want relays for heavy loads. (see page 41) Want lights? We can add 1 or 2 lights to each switch in your choice of colors. The switch panels are 1 3/4” tall. A single switch is 1 5/8” long. Each additional switch adds 1 1/8”. (for example a 6 switch panel is 7 3/8” long) The toggle is 5/8” tall.
The GT4D series include the dividers to safeguard those important circuits from accidentally being switched. The GT3 series are without dividers. The GT2 series switches are without dividers have a short rocker so to not interfere while on your door and include polarity reversing modules(intended for power windows / locks but we can still make these however you would like).
Don’t know if you have Polarity reversing Motors? See the Product Instructions Tab to determine if your motors are Polarity reversing or Non-Polarity reversing.
SKU: GT2
